Fiber Laser AlgoLaser Einsteiger
AlgoLaser Pixi 1.5W 1064nm Infrared
$379
ungefährer Straßenpreis A 1064nm infrared variant of the Pixi, using a fiber-wavelength source instead of the standard 450nm blue diode to mark bare and anodized metal, coated surfaces, and some plastics — jobs the standard Pixi can't do. Keeps the same enclosed, camera-autofocus, touchscreen design as the standard Pixi.
Vollständige Spezifikationen
| Laser | |
| Typ | Fiber Laser |
| Wellenlänge | 1,064 nm |
| Optische Leistung | 1.5 W |
| Leistung | |
| Arbeitsbereich | 100 × 100 mm |
| Höchstgeschwindigkeit | 6,000 mm/min |
| Fokus | Manuell |
| Funktionen | |
| Gehäuse | Ja |
| Luftunterstützung | Nein |
| Rotationsaufsatz-kompatibel | Ja |
| WLAN | Ja |
| Kamera | Nein |
| Physisch | |
| Ca.-Preis | $379 |
| Erscheinungsjahr | 2025 |
| Gewicht | 3.2 kg |
Vor- und Nachteile
Was uns gefällt
- Marks bare metal and anodized aluminum — not possible with blue-diode Pixi
- Same enclosed, touchscreen convenience as the standard Pixi
- Compact and portable
- Good entry point into metal marking without a full galvo fiber setup
Achtung
- Cannot engrave wood, leather, or acrylic — infrared-only use case
- Very low power (1.5W) limits marking depth and speed
- Small work area
- Pricier than the standard blue-diode Pixi
Kompatible Materialien
MetallgravurEloxiertes Aluminiumcoated metalsplastic
Am besten geeignet für
Mit ähnlich bepreisten Maschinen vergleichen
- Genmitsu Z5-1 Fiber $949 Vollständiger Vergleich →
- ComMarker B4 20W $1,399 Vollständiger Vergleich →
- xTool F1 Fiber + Diode $1,499 Vollständiger Vergleich →
Ähnliche Maschinen