AlgoLaser Pixi 1.5W 1064nm Infrared vs. ComMarker B4 20W
| Laser | ||
| Typ | Fiber Laser | Fiber Laser |
| Wellenlänge | 1,064 nm | 1,064 nm |
| Optische Leistung | 1.5 W | 20 W |
| Leistung | ||
| Arbeitsbereich | 100 × 100 mm | 150 × 150 mm |
| Höchstgeschwindigkeit | 6,000 mm/min | 600,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Ja | Nein |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $379 | $1,399 |
| Erscheinungsjahr | 2025 | 2022 |
| Gewicht | 3.2 kg | 11 kg |
Vor- und Nachteile
AlgoLaser Pixi 1.5W 1064nm Infrared
Was uns gefällt
- Marks bare metal and anodized aluminum — not possible with blue-diode Pixi
- Same enclosed, touchscreen convenience as the standard Pixi
- Compact and portable
- Good entry point into metal marking without a full galvo fiber setup
Achtung
- Cannot engrave wood, leather, or acrylic — infrared-only use case
- Very low power (1.5W) limits marking depth and speed
- Small work area
- Pricier than the standard blue-diode Pixi
ComMarker B4 20W
Was uns gefällt
- Compact and portable at only 11 kg
- Affordable entry into professional fiber laser engraving
- Available in 20W/30W/50W/100W variants
- Works with EzCad2 and LightBurn
- Strong community and accessory ecosystem
Achtung
- No autofocus (manual or separate motorized lift table)
- Standard 110×110mm work area is small (optional lens required for 200×200mm)
- USB-only connectivity (no Wi-Fi)
- No built-in enclosure or camera
Kompatible Materialien
AlgoLaser Pixi 1.5W 1064nm Infrared
MetallgravurEloxiertes Aluminiumcoated metalsplastic
ComMarker B4 20W
steelaluminumbrasscopperEloxiertes AluminiumtitaniumgoldsilverLedercoated metals
AlgoLaser Pixi 1.5W 1064nm Infrared kostet $379 (73% weniger) als ComMarker B4 20W, das $1,399 kostet.
ComMarker B4 20W hat 93% mehr optische Leistung (20W vs. 1.5W).
ComMarker B4 20W bietet einen 56% größeren Arbeitsbereich (150 × 150 mm vs. 100 × 100 mm).
ComMarker B4 20W hat eine 99% höhere Höchstgeschwindigkeit (600,000 mm/min vs. 6,000 mm/min).
Bei den Funktionen gilt: AlgoLaser Pixi 1.5W 1064nm Infrared verfügt über ein geschlossenes Gehäuse, ComMarker B4 20W nicht; AlgoLaser Pixi 1.5W 1064nm Infrared verfügt über WLAN-Konnektivität, ComMarker B4 20W nicht.