Diode Laser Creality Débutants
Creality CR-Laser Falcon 10W
$199
prix indicatif The CR-Laser Falcon 10W doubles the optical power of the 5W model, cutting up to 6mm basswood or 5mm black acrylic in a single pass with a 0.06×0.08mm spot. It shares the same open-frame design and Class 4 (FDA) beam rating as the 5W, so the same safety caveats apply — it is the oldest-generation design still sold alongside the newer enclosed A1 and Falcon2 Pro lines.
Spécifications complètes
| Laser | |
| Type | Diode Laser |
| Longueur d'onde | 455 nm |
| Puissance optique | 10 W |
| Performance | |
| Zone de travail | 400 × 415 mm |
| Vitesse max | 20,000 mm/min |
| Mise au point | Manuelle |
| Fonctionnalités | |
| Enceinte | Non |
| Assistance air | Non |
| Compatible rotatif | Oui |
| WiFi | Non |
| Caméra | Non |
| Physique | |
| Prix approx. | $199 |
| Année de sortie | 2022 |
| Poids | 3.2 kg |
Avantages et inconvénients
Ce qu'on aime
- Meaningful power step up from the 5W at a similarly low $199 price
- Cuts 6mm basswood or 5mm black acrylic in a single pass
- Same large 400×415mm work area
- Light and portable at 3.2kg
Points d'attention
- Class 4 (FDA) open-beam laser — safety glasses required and sold separately
- No air assist, camera, or WiFi included
- Manual focus only
- Oldest design generation in the current lineup
Matériaux compatibles
BoisAcryliqueCuirCartonTissuPapierCaoutchoucPierre
Idéal pour
Comparer avec des machines de prix similaire
- xTool D1 5W $199 Comparaison complète →
- Creality Falcon A1C Basic 5W $199 Comparaison complète →
- Sculpfun S9 $189 Comparaison complète →
Machines similaires
