Creality CR-Laser Falcon 10W vs Sculpfun S9
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 455 nm | 450 nm |
| Puissance optique | 10 W | 5.5 W |
| Performance | ||
| Zone de travail | 400 × 415 mm | 410 × 415 mm |
| Vitesse max | 20,000 mm/min | 6,000 mm/min |
| Mise au point | Manuelle | Manuelle |
| Fonctionnalités | ||
| Enceinte | Non | Non |
| Assistance air | Non | Non |
| Compatible rotatif | Oui | Oui |
| WiFi | Non | Non |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $199 | $189 |
| Année de sortie | 2022 | 2022 |
| Poids | 3.2 kg | 3 kg |
Avantages et inconvénients
Creality CR-Laser Falcon 10W
Ce qu'on aime
- Meaningful power step up from the 5W at a similarly low $199 price
- Cuts 6mm basswood or 5mm black acrylic in a single pass
- Same large 400×415mm work area
- Light and portable at 3.2kg
Points d'attention
- Class 4 (FDA) open-beam laser — safety glasses required and sold separately
- No air assist, camera, or WiFi included
- Manual focus only
- Oldest design generation in the current lineup
Sculpfun S9
Ce qu'on aime
- Excellent value at under $200
- Ultra-thin 0.06mm compressed spot
- Easy 20-minute assembly
- Compatible with LightBurn, LaserGRBL
- Cuts 8mm pine cleanly
Points d'attention
- No air assist or enclosure
- No WiFi connectivity
- Open frame requires safe operating environment
Matériaux compatibles
Creality CR-Laser Falcon 10W
BoisAcryliqueCuirCartonTissuPapierCaoutchoucPierre
Sculpfun S9
BoisCuirCartonTissuPapierCaoutchoucAcrylique
Le Sculpfun S9 coûte 189 $ (5 % de moins) que le Creality CR-Laser Falcon 10W, proposé à 199 $.
Le Creality CR-Laser Falcon 10W offre 45 % de puissance optique en plus (10W contre 5.5W).
Le Sculpfun S9 propose une zone de travail 2 % plus grande (410 × 415 mm contre 400 × 415 mm).
Le Creality CR-Laser Falcon 10W atteint une vitesse maximale 70 % supérieure (20,000 mm/min contre 6,000 mm/min).