LaserPecker LP1 Plus vs Sculpfun S9
| Laser | ||
| Tipo | Diode Laser | Diode Laser |
| Comprimento de onda | 405 nm | 450 nm |
| Potência óptica | 0.6 W | 5.5 W |
| Desempenho | ||
| Área de trabalho | 100 × 100 mm | 410 × 415 mm |
| Velocidade máx. | 36,000 mm/min | 6,000 mm/min |
| Foco | Manual | Manual |
| Recursos | ||
| Carcaça | Não | Não |
| Assistência de ar | Não | Não |
| Compatível com rotativo | Não | Sim |
| WiFi | Não | Não |
| Câmera | Não | Não |
| Físico | ||
| Preço aprox. | $219 | $189 |
| Ano de lançamento | 2026 | 2022 |
| Peso | 0.72 kg | 3 kg |
Prós e contras
LaserPecker LP1 Plus
O que gostamos
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Pontos de atenção
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Sculpfun S9
O que gostamos
- Excellent value at under $200
- Ultra-thin 0.06mm compressed spot
- Easy 20-minute assembly
- Compatible with LightBurn, LaserGRBL
- Cuts 8mm pine cleanly
Pontos de atenção
- No air assist or enclosure
- No WiFi connectivity
- Open frame requires safe operating environment
Materiais compatíveis
LaserPecker LP1 Plus
MadeiraCouroPapelplasticAcrílicoTecidofood
Sculpfun S9
MadeiraCouroPapelãoTecidoPapelBorrachaAcrílico
O Sculpfun S9 custa $189 (14% a menos) do que o LaserPecker LP1 Plus, que custa $219.
O Sculpfun S9 tem 89% mais potência óptica (5.5W vs 0.6W).
O Sculpfun S9 oferece uma área de trabalho 94% maior (410 × 415 mm vs 100 × 100 mm).
O LaserPecker LP1 Plus atinge uma velocidade máxima 83% superior (36,000 mm/min vs 6,000 mm/min).
Em termos de recursos, o Sculpfun S9 inclui compatibilidade com acessório rotativo, enquanto o LaserPecker LP1 Plus não.