Creality CR-Laser Falcon 10W vs LaserPecker LP1 Plus
| Laser | ||
| Tipo | Diode Laser | Diode Laser |
| Comprimento de onda | 455 nm | 405 nm |
| Potência óptica | 10 W | 0.6 W |
| Desempenho | ||
| Área de trabalho | 400 × 415 mm | 100 × 100 mm |
| Velocidade máx. | 20,000 mm/min | 36,000 mm/min |
| Foco | Manual | Manual |
| Recursos | ||
| Carcaça | Não | Não |
| Assistência de ar | Não | Não |
| Compatível com rotativo | Sim | Não |
| WiFi | Não | Não |
| Câmera | Não | Não |
| Físico | ||
| Preço aprox. | $199 | $219 |
| Ano de lançamento | 2022 | 2026 |
| Peso | 3.2 kg | 0.72 kg |
Prós e contras
Creality CR-Laser Falcon 10W
O que gostamos
- Meaningful power step up from the 5W at a similarly low $199 price
- Cuts 6mm basswood or 5mm black acrylic in a single pass
- Same large 400×415mm work area
- Light and portable at 3.2kg
Pontos de atenção
- Class 4 (FDA) open-beam laser — safety glasses required and sold separately
- No air assist, camera, or WiFi included
- Manual focus only
- Oldest design generation in the current lineup
LaserPecker LP1 Plus
O que gostamos
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Pontos de atenção
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Materiais compatíveis
Creality CR-Laser Falcon 10W
MadeiraAcrílicoCouroPapelãoTecidoPapelBorrachaPedra
LaserPecker LP1 Plus
MadeiraCouroPapelplasticAcrílicoTecidofood
O Creality CR-Laser Falcon 10W custa $199 (9% a menos) do que o LaserPecker LP1 Plus, que custa $219.
O Creality CR-Laser Falcon 10W tem 94% mais potência óptica (10W vs 0.6W).
O Creality CR-Laser Falcon 10W oferece uma área de trabalho 94% maior (400 × 415 mm vs 100 × 100 mm).
O LaserPecker LP1 Plus atinge uma velocidade máxima 44% superior (36,000 mm/min vs 20,000 mm/min).
Em termos de recursos, o Creality CR-Laser Falcon 10W inclui compatibilidade com acessório rotativo, enquanto o LaserPecker LP1 Plus não.