AlgoLaser DIY KIT Extended 10W (15.7"×33.5") vs LaserPecker LP1 Plus
| Laser | ||
| Tipo | Diode Laser | Diode Laser |
| Comprimento de onda | 455 nm | 405 nm |
| Potência óptica | 10 W | 0.6 W |
| Desempenho | ||
| Área de trabalho | 400 × 850 mm | 100 × 100 mm |
| Velocidade máx. | 12,000 mm/min | 36,000 mm/min |
| Foco | Manual | Manual |
| Recursos | ||
| Carcaça | Não | Não |
| Assistência de ar | Não | Não |
| Compatível com rotativo | Não | Não |
| WiFi | Sim | Não |
| Câmera | Não | Não |
| Físico | ||
| Preço aprox. | $289 | $219 |
| Ano de lançamento | 2024 | 2026 |
| Peso | 3.9 kg | 0.72 kg |
Prós e contras
AlgoLaser DIY KIT Extended 10W (15.7"×33.5")
O que gostamos
- Longer bed than the standard DIY KIT for bigger projects
- Budget-friendly for the extra work area gained
- Same simple GRBL operation as the standard kit
- More power than the 5W version for more projects
Pontos de atenção
- Camera, air pump are sold separately
- Larger footprint needed on the desk/bench
LaserPecker LP1 Plus
O que gostamos
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Pontos de atenção
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Materiais compatíveis
AlgoLaser DIY KIT Extended 10W (15.7"×33.5")
MadeiraCouroPapelãoTecidoPapelBorracha
LaserPecker LP1 Plus
MadeiraCouroPapelplasticAcrílicoTecidofood
O LaserPecker LP1 Plus custa $219 (24% a menos) do que o AlgoLaser DIY KIT Extended 10W (15.7"×33.5"), que custa $289.
O AlgoLaser DIY KIT Extended 10W (15.7"×33.5") tem 94% mais potência óptica (10W vs 0.6W).
O AlgoLaser DIY KIT Extended 10W (15.7"×33.5") oferece uma área de trabalho 97% maior (400 × 850 mm vs 100 × 100 mm).
O LaserPecker LP1 Plus atinge uma velocidade máxima 67% superior (36,000 mm/min vs 12,000 mm/min).
Em termos de recursos, o AlgoLaser DIY KIT Extended 10W (15.7"×33.5") inclui conectividade WiFi, enquanto o LaserPecker LP1 Plus não.