プライバシー

FLUX Beambox 40W vs Glowforge Pro 45W CO2 (Certified Rebuilt)

FLUX Beambox 40W
$2,845
公式ページを見る
Glowforge Pro 45W CO2 (Certified Rebuilt)
Glowforge Pro 45W CO2 (Certified Rebuilt)
$2,999
公式ページを見る
レーザー
タイプCO2 LaserCO2 Laser
波長10,600 nm10,600 nm
光出力40 W45 W
性能
作業エリア375 × 265 mm495 × 279 mm
最高速度30,000 mm/min8,400 mm/min
フォーカス手動オートフォーカス
機能
エンクロージャーありあり
エアアシストなしあり
ロータリー対応ありなし
WiFiありあり
カメラありあり
物理仕様
参考価格$2,845$2,999
発売年20182017
重量21 kg24.9 kg
メリット・デメリット

FLUX Beambox 40W

良い点

  • Proven, well-documented platform with a large user community
  • Built-in camera for visual positioning
  • Polished Beam Studio software — fully offline
  • 40W for clean cuts up to 10mm in wood and acrylic
  • WiFi, USB, and Ethernet connectivity

注意点

  • Legacy model — superseded by the Beambox II
  • Smaller work area than Beambox II (375×265 vs 600×375mm)
  • Manual focus only
  • No built-in air assist
  • Heavy at 21 kg

Glowforge Pro 45W CO2 (Certified Rebuilt)

良い点

  • Pro Passthrough slot for materials of unlimited length
  • 45W CO2 for excellent cut quality in wood, acrylic, and leather
  • Cloud app for zero-config operation from any device
  • Built-in camera for precise design placement
  • Full enclosure — safe for home and office

注意点

  • Only available as Certified Rebuilt — no new units
  • Small 19.5"x11" (495x279mm) cutting area
  • Requires internet — no offline operation
  • No LightBurn support
  • Subscription costs for premium design catalogue
  • CO2 tube will eventually need replacing
対応素材

FLUX Beambox 40W

木材アクリルレザー段ボール布地ゴムフォームガラス

Glowforge Pro 45W CO2 (Certified Rebuilt)

木材アクリルレザー段ボール布地ゴムフォームガラス

FLUX Beambox 40Wは$2,845で、Glowforge Pro 45W CO2 (Certified Rebuilt)($2,999)より5%安くなっています。

Glowforge Pro 45W CO2 (Certified Rebuilt)は光出力が11%高くなっています(45W対40W)。

Glowforge Pro 45W CO2 (Certified Rebuilt)は作業エリアが28%広くなっています(495 × 279 mm対375 × 265 mm)。

FLUX Beambox 40Wは最高速度が72%高くなっています(30,000 mm/min対8,400 mm/min)。

機能面では、Glowforge Pro 45W CO2 (Certified Rebuilt)はエアアシストを備えていますが、FLUX Beambox 40Wにはありません; FLUX Beambox 40Wはロータリーアタッチメント対応を備えていますが、Glowforge Pro 45W CO2 (Certified Rebuilt)にはありません。