プライバシー

AlgoLaser Pixi 1.5W 1064nm Infrared vs Genmitsu Z5-1 Fiber

AlgoLaser Pixi 1.5W 1064nm Infrared
$379
公式ページを見る
Genmitsu Z5-1 Fiber
$949
Amazonで価格を確認
レーザー
タイプFiber LaserFiber Laser
波長1,064 nm1,064 nm
光出力1.5 W2 W
性能
作業エリア100 × 100 mm70 × 70 mm
最高速度6,000 mm/min600,000 mm/min
フォーカス手動固定
機能
エンクロージャーありなし
エアアシストなしなし
ロータリー対応ありなし
WiFiありなし
カメラなしなし
物理仕様
参考価格$379$949
発売年20252023
重量3.2 kg4.3 kg
メリット・デメリット

AlgoLaser Pixi 1.5W 1064nm Infrared

良い点

  • Marks bare metal and anodized aluminum — not possible with blue-diode Pixi
  • Same enclosed, touchscreen convenience as the standard Pixi
  • Compact and portable
  • Good entry point into metal marking without a full galvo fiber setup

注意点

  • Cannot engrave wood, leather, or acrylic — infrared-only use case
  • Very low power (1.5W) limits marking depth and speed
  • Small work area
  • Pricier than the standard blue-diode Pixi

Genmitsu Z5-1 Fiber

良い点

  • 2-in-1: desktop stand or handheld for marking irregular objects
  • Galvo head at 10,000mm/s for fast metal marking
  • 4K marking resolution (0.001mm spot)
  • Marks all metals, stone, and rubber without coating
  • Budget entry into fiber marking at $949

注意点

  • Very small 70x70mm marking area
  • Only 2W — cannot engrave deeply or cut
  • No enclosure — eye protection required
  • Not suitable for wood or acrylic
  • Limited compared to higher-wattage fiber machines
対応素材

AlgoLaser Pixi 1.5W 1064nm Infrared

金属彫刻アルマイトアルミcoated metalsplastic

Genmitsu Z5-1 Fiber

金属彫刻アルマイトアルミガラス石材ゴム

AlgoLaser Pixi 1.5W 1064nm Infraredは$379で、Genmitsu Z5-1 Fiber($949)より60%安くなっています。

Genmitsu Z5-1 Fiberは光出力が25%高くなっています(2W対1.5W)。

AlgoLaser Pixi 1.5W 1064nm Infraredは作業エリアが51%広くなっています(100 × 100 mm対70 × 70 mm)。

Genmitsu Z5-1 Fiberは最高速度が99%高くなっています(600,000 mm/min対6,000 mm/min)。

機能面では、AlgoLaser Pixi 1.5W 1064nm Infraredはエンクロージャーを備えていますが、Genmitsu Z5-1 Fiberにはありません; AlgoLaser Pixi 1.5W 1064nm InfraredはWi-Fi接続機能を備えていますが、Genmitsu Z5-1 Fiberにはありません; AlgoLaser Pixi 1.5W 1064nm Infraredはロータリーアタッチメント対応を備えていますが、Genmitsu Z5-1 Fiberにはありません。