CO2 Laser xTool
xTool P2S 55W CO2
$3,399
prix indicatif The xTool P2S is the refreshed 2024 successor to the original P2, sharing the same 55W CO2 tube and 600×305mm enclosed work area at a reduced price point. It adds improved ACS (Auto-Streamline) software workflow and refined onboarding. Cuts 18mm plywood cleanly and engraves at up to 600mm/s. The pass-through slot accepts oversized materials and a conveyor feeder is available as an accessory.
Spécifications complètes
| Laser | |
| Type | CO2 Laser |
| Longueur d'onde | 10,600 nm |
| Puissance optique | 55 W |
| Performance | |
| Zone de travail | 600 × 305 mm |
| Vitesse max | 36,000 mm/min |
| Mise au point | Mise au point auto |
| Fonctionnalités | |
| Enceinte | Oui |
| Assistance air | Oui |
| Compatible rotatif | Oui |
| WiFi | Oui |
| Caméra | Oui |
| Physique | |
| Prix approx. | $3,399 |
| Année de sortie | 2024 |
| Poids | 45 kg |
Avantages et inconvénients
Ce qu'on aime
- 55W CO2 tube cuts thick wood, acrylic, leather, and fabric
- Built-in camera for auto-placement and material detection
- Pass-through slot for oversized materials
- Auto-focus and integrated air assist standard
- Better pricing than the original P2
Points d'attention
- Heavy at 45 kg — permanent desktop placement
- CO2 tube will eventually need replacing
- Requires dedicated ventilation setup
- Very similar to original P2 — not a major upgrade
Matériaux compatibles
BoisAcryliqueCuirCartonTissuPapierCaoutchoucMousseVerrePierre
Idéal pour
Comparer avec des machines de prix similaire
- FLUX Beambox II 55W $3,290 Comparaison complète →
- OMTech Pronto 35 60W $3,699 Comparaison complète →
- Glowforge Pro 45W CO2 (Certified Rebuilt) $2,999 Comparaison complète →
Machines similaires
