Diode Laser LaserPecker Débutants
LaserPecker LP2 Plus
$799
prix indicatif The LaserPecker LP2 Plus is a 10W portable desktop diode engraver and cutter, 6x faster (4,000mm/s) than the original LP2 with roughly 2x the power. It cuts 6mm basswood or black acrylic in a single pass (up to 12mm with multiple passes), delivers a fine 0.06×0.08mm spot, and adds WiFi, a security key, emergency stop, and lid-open halt as safety upgrades over the base LP2. Compatible with the SpinTrack Versatile Electric Roller, Rotary Extension, and Slide Extension accessories for cylindrical or oversized projects. Weighs 3.39kg.
Spécifications complètes
| Laser | |
| Type | Diode Laser |
| Longueur d'onde | 450 nm |
| Puissance optique | 10 W |
| Performance | |
| Zone de travail | 100 × 100 mm |
| Vitesse max | 240,000 mm/min |
| Mise au point | Manuelle |
| Fonctionnalités | |
| Enceinte | Non |
| Assistance air | Non |
| Compatible rotatif | Oui |
| WiFi | Oui |
| Caméra | Non |
| Physique | |
| Prix approx. | $799 |
| Année de sortie | 2026 |
| Poids | 3.39 kg |
Avantages et inconvénients
Ce qu'on aime
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Points d'attention
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Matériaux compatibles
BoisCuirAcryliquePapierPierreAluminium anodiséstainless steelVerreCaoutchouc
Idéal pour
Comparer avec des machines de prix similaire
- Sculpfun S30 Ultra 33W $770 Comparaison complète →
- AlgoLaser Alpha MK2 20W Extended (15.7"×33.5") $729 Comparaison complète →
- xTool D1 Pro 20W $699 Comparaison complète →
Machines similaires
