Diode Laser Creality Débutants
Creality CR-Laser Falcon 5W
$119
prix indicatif The CR-Laser Falcon 5W is Creality's original, oldest-generation open-frame diode engraver — the budget entry point below the A1 and Falcon2 lines. It is rated Class 4 (FDA), a step down in beam safety from the enclosed Class 1 models elsewhere in the lineup, so laser safety glasses (sold separately) are effectively required. Cuts up to 3mm basswood in a single pass with a fine 0.06×0.06mm spot.
Spécifications complètes
| Laser | |
| Type | Diode Laser |
| Longueur d'onde | 455 nm |
| Puissance optique | 5 W |
| Performance | |
| Zone de travail | 400 × 415 mm |
| Vitesse max | 10,000 mm/min |
| Mise au point | Manuelle |
| Fonctionnalités | |
| Enceinte | Non |
| Assistance air | Non |
| Compatible rotatif | Oui |
| WiFi | Non |
| Caméra | Non |
| Physique | |
| Prix approx. | $119 |
| Année de sortie | 2022 |
| Poids | 3.2 kg |
Avantages et inconvénients
Ce qu'on aime
- Very low $119 entry price
- Large 400×415mm work area for the price
- Compact and light at 3.2kg
- 200+ material compatibility claimed
Points d'attention
- Class 4 (FDA) open-beam laser — genuine eye-safety risk; safety glasses required and sold separately
- No air assist included
- No camera, WiFi, or autofocus
- Oldest design generation in the current Creality lineup (2022)
Matériaux compatibles
BoisAcryliqueCuirCartonTissuPapierCaoutchoucPierre
Idéal pour
Comparer avec des machines de prix similaire
- Two Trees TTS-55 $139 Comparaison complète →
- AlgoLaser DIY KIT MINI 5W $139 Comparaison complète →
- Sculpfun iCube 3W $159 Comparaison complète →
Machines similaires
