Snapmaker Ray 40W vs xTool S1 40W
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 455 nm | 455 nm |
| Puissance optique | 40 W | 40 W |
| Performance | ||
| Zone de travail | 400 × 600 mm | 498 × 319 mm |
| Vitesse max | 30,000 mm/min | 36,000 mm/min |
| Mise au point | Manuelle | Mise au point auto |
| Fonctionnalités | ||
| Enceinte | Non | Oui |
| Assistance air | Oui | Oui |
| Compatible rotatif | Oui | Oui |
| WiFi | Oui | Oui |
| Caméra | Non | Oui |
| Physique | ||
| Prix approx. | $1,699 | $2,499 |
| Année de sortie | 2023 | 2024 |
| Poids | 15.06 kg | 20 kg |
Avantages et inconvénients
Snapmaker Ray 40W
Ce qu'on aime
- Cuts up to 15mm basswood in a single pass
- Smart Air Assist pump included in box
- Large 400×600mm work area
- Wi-Fi + USB connectivity with LightBurn support
- FDA Class 1 certified with optional enclosure
Points d'attention
- No autofocus (manual focus lever)
- No built-in enclosure (sold separately)
- No camera module
- Laser-only (no 3-in-1 like Artisan)
xTool S1 40W
Ce qu'on aime
- Cuts 18mm wood and 15mm acrylic in one pass
- Can mark and score thin stainless steel
- Full Class 1 enclosure — no safety glasses required
- Built-in camera for precise placement
- Autofocus and air assist included
- Same fast 36,000 mm/min (600 mm/s) speed as 20W
Points d'attention
- Significantly pricier than the 20W variant
- Heavier than open-frame equivalents
- Enclosure limits maximum material height
- Diode still falls short of CO₂ for thick acrylic or glass
Matériaux compatibles
Snapmaker Ray 40W
BoisAcryliqueCuirTissuPapierAluminium anodiséGravure métal
xTool S1 40W
BoisAcryliqueCuirCartonTissuPapierCaoutchoucPierreGravure métalAluminium anodiséstainless steel
Le Snapmaker Ray 40W coûte 1,699 $ (32 % de moins) que le xTool S1 40W, proposé à 2,499 $.
Les deux machines partagent la même puissance optique de 40W.
Le Snapmaker Ray 40W propose une zone de travail 34 % plus grande (400 × 600 mm contre 498 × 319 mm).
Le xTool S1 40W atteint une vitesse maximale 17 % supérieure (36,000 mm/min contre 30,000 mm/min).
Côté fonctionnalités, le xTool S1 40W dispose de un capot fermé, contrairement au Snapmaker Ray 40W; le xTool S1 40W dispose de une caméra, contrairement au Snapmaker Ray 40W.