Snapmaker Ray 20W vs xTool D1 Pro 20W
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 455 nm | 455 nm |
| Puissance optique | 20 W | 20 W |
| Performance | ||
| Zone de travail | 400 × 600 mm | 430 × 390 mm |
| Vitesse max | 30,000 mm/min | 24,000 mm/min |
| Mise au point | Manuelle | Manuelle |
| Fonctionnalités | ||
| Enceinte | Non | Non |
| Assistance air | Oui | Oui |
| Compatible rotatif | Oui | Oui |
| WiFi | Oui | Oui |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $1,299 | $699 |
| Année de sortie | 2023 | 2022 |
| Poids | 14.6 kg | 5.8 kg |
Avantages et inconvénients
Snapmaker Ray 20W
Ce qu'on aime
- Smart Air Assist pump included in box
- Large 400×600mm work area
- Wi-Fi + USB connectivity
- LightBurn compatible out of the box
- Strong Snapmaker community and ecosystem
Points d'attention
- No autofocus (manual focus lever)
- No built-in enclosure (sold separately)
- No camera for material detection
- Lower power than 40W model
xTool D1 Pro 20W
Ce qu'on aime
- Cuts up to 10mm pine in a single pass
- Air assist included in the box
- WiFi and USB control
- Excellent engraving speed at 24,000 mm/min
- Wide material compatibility
Points d'attention
- No enclosure — not safe for unattended operation
- Higher price point for a diode laser
- Requires ventilation setup for cutting fumes
Matériaux compatibles
Snapmaker Ray 20W
BoisAcryliqueCuirTissuPapierAluminium anodisé
xTool D1 Pro 20W
BoisAcryliqueCuirCartonTissuPapierCaoutchoucPierreGravure métal
Le xTool D1 Pro 20W coûte 699 $ (46 % de moins) que le Snapmaker Ray 20W, proposé à 1,299 $.
Les deux machines partagent la même puissance optique de 20W.
Le Snapmaker Ray 20W propose une zone de travail 30 % plus grande (400 × 600 mm contre 430 × 390 mm).
Le Snapmaker Ray 20W atteint une vitesse maximale 20 % supérieure (30,000 mm/min contre 24,000 mm/min).