LaserPecker LX2 vs xTool S1 40W
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 455 nm | 455 nm |
| Puissance optique | 40 W | 40 W |
| Performance | ||
| Zone de travail | 500 × 305 mm | 498 × 319 mm |
| Vitesse max | 60,000 mm/min | 36,000 mm/min |
| Mise au point | Mise au point auto | Mise au point auto |
| Fonctionnalités | ||
| Enceinte | Oui | Oui |
| Assistance air | Oui | Oui |
| Compatible rotatif | Oui | Oui |
| WiFi | Oui | Oui |
| Caméra | Oui | Oui |
| Physique | ||
| Prix approx. | $1,999 | $2,499 |
| Année de sortie | 2025 | 2024 |
| Poids | 22.5 kg | 20 kg |
Avantages et inconvénients
LaserPecker LX2
Ce qu'on aime
- Modular laser system: swap between 20W, 40W, 60W diode + optional 2W IR
- Enclosed design for safety — suitable for home and office use
- 500×305mm work area — largest in LaserPecker lineup
- WiFi + mobile app support; compact at 22.5 kg
Points d'attention
- Diode laser: slower and less precise than CO2 for thick material cutting
xTool S1 40W
Ce qu'on aime
- Cuts 18mm wood and 15mm acrylic in one pass
- Can mark and score thin stainless steel
- Full Class 1 enclosure — no safety glasses required
- Built-in camera for precise placement
- Autofocus and air assist included
- Same fast 36,000 mm/min (600 mm/s) speed as 20W
Points d'attention
- Significantly pricier than the 20W variant
- Heavier than open-frame equivalents
- Enclosure limits maximum material height
- Diode still falls short of CO₂ for thick acrylic or glass
Matériaux compatibles
LaserPecker LX2
BoisAcryliqueCuirTissuPapierVerreCaoutchoucPierre
xTool S1 40W
BoisAcryliqueCuirCartonTissuPapierCaoutchoucPierreGravure métalAluminium anodiséstainless steel
Le LaserPecker LX2 coûte 1,999 $ (20 % de moins) que le xTool S1 40W, proposé à 2,499 $.
Les deux machines partagent la même puissance optique de 40W.
Le xTool S1 40W propose une zone de travail 4 % plus grande (498 × 319 mm contre 500 × 305 mm).
Le LaserPecker LX2 atteint une vitesse maximale 40 % supérieure (60,000 mm/min contre 36,000 mm/min).