LaserPecker LP2 Plus vs Snapmaker Ray 20W
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 450 nm | 455 nm |
| Puissance optique | 10 W | 20 W |
| Performance | ||
| Zone de travail | 100 × 100 mm | 400 × 600 mm |
| Vitesse max | 240,000 mm/min | 30,000 mm/min |
| Mise au point | Manuelle | Manuelle |
| Fonctionnalités | ||
| Enceinte | Non | Non |
| Assistance air | Non | Oui |
| Compatible rotatif | Oui | Oui |
| WiFi | Oui | Oui |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $799 | $1,299 |
| Année de sortie | 2026 | 2023 |
| Poids | 3.39 kg | 14.6 kg |
Avantages et inconvénients
LaserPecker LP2 Plus
Ce qu'on aime
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Points d'attention
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Snapmaker Ray 20W
Ce qu'on aime
- Smart Air Assist pump included in box
- Large 400×600mm work area
- Wi-Fi + USB connectivity
- LightBurn compatible out of the box
- Strong Snapmaker community and ecosystem
Points d'attention
- No autofocus (manual focus lever)
- No built-in enclosure (sold separately)
- No camera for material detection
- Lower power than 40W model
Matériaux compatibles
LaserPecker LP2 Plus
BoisCuirAcryliquePapierPierreAluminium anodiséstainless steelVerreCaoutchouc
Snapmaker Ray 20W
BoisAcryliqueCuirTissuPapierAluminium anodisé
Le LaserPecker LP2 Plus coûte 799 $ (38 % de moins) que le Snapmaker Ray 20W, proposé à 1,299 $.
Le Snapmaker Ray 20W offre 50 % de puissance optique en plus (20W contre 10W).
Le Snapmaker Ray 20W propose une zone de travail 96 % plus grande (400 × 600 mm contre 100 × 100 mm).
Le LaserPecker LP2 Plus atteint une vitesse maximale 88 % supérieure (240,000 mm/min contre 30,000 mm/min).
Côté fonctionnalités, le Snapmaker Ray 20W dispose de l'assistance air, contrairement au LaserPecker LP2 Plus.