LaserPecker LP1 Plus vs Sculpfun S9
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 405 nm | 450 nm |
| Puissance optique | 0.6 W | 5.5 W |
| Performance | ||
| Zone de travail | 100 × 100 mm | 410 × 415 mm |
| Vitesse max | 36,000 mm/min | 6,000 mm/min |
| Mise au point | Manuelle | Manuelle |
| Fonctionnalités | ||
| Enceinte | Non | Non |
| Assistance air | Non | Non |
| Compatible rotatif | Non | Oui |
| WiFi | Non | Non |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $219 | $189 |
| Année de sortie | 2026 | 2022 |
| Poids | 0.72 kg | 3 kg |
Avantages et inconvénients
LaserPecker LP1 Plus
Ce qu'on aime
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Points d'attention
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Sculpfun S9
Ce qu'on aime
- Excellent value at under $200
- Ultra-thin 0.06mm compressed spot
- Easy 20-minute assembly
- Compatible with LightBurn, LaserGRBL
- Cuts 8mm pine cleanly
Points d'attention
- No air assist or enclosure
- No WiFi connectivity
- Open frame requires safe operating environment
Matériaux compatibles
LaserPecker LP1 Plus
BoisCuirPapierplasticAcryliqueTissufood
Sculpfun S9
BoisCuirCartonTissuPapierCaoutchoucAcrylique
Le Sculpfun S9 coûte 189 $ (14 % de moins) que le LaserPecker LP1 Plus, proposé à 219 $.
Le Sculpfun S9 offre 89 % de puissance optique en plus (5.5W contre 0.6W).
Le Sculpfun S9 propose une zone de travail 94 % plus grande (410 × 415 mm contre 100 × 100 mm).
Le LaserPecker LP1 Plus atteint une vitesse maximale 83 % supérieure (36,000 mm/min contre 6,000 mm/min).
Côté fonctionnalités, le Sculpfun S9 dispose de la compatibilité avec un accessoire rotatif, contrairement au LaserPecker LP1 Plus.