LaserPecker LP1 Plus vs Sculpfun iCube Ultra 12W
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 405 nm | 455 nm |
| Puissance optique | 0.6 W | 12 W |
| Performance | ||
| Zone de travail | 100 × 100 mm | 150 × 150 mm |
| Vitesse max | 36,000 mm/min | 10,000 mm/min |
| Mise au point | Manuelle | Mise au point auto |
| Fonctionnalités | ||
| Enceinte | Non | Oui |
| Assistance air | Non | Non |
| Compatible rotatif | Non | Oui |
| WiFi | Non | Non |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $219 | $329 |
| Année de sortie | 2026 | 2025 |
| Poids | 0.72 kg | 5.95 kg |
Avantages et inconvénients
LaserPecker LP1 Plus
Ce qu'on aime
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Points d'attention
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Sculpfun iCube Ultra 12W
Ce qu'on aime
- Class 1 safety certification — fully enclosed, door-interlock protected
- 12W diode cuts 10mm paulownia in one pass
- Built-in multi-layer smoke filtration system
- Compact and portable at 5.95 kg — smallest 12W enclosed laser
- Auto-focus for hands-off setup
- Optional dual-laser version adds 1.2W IR for marking metals
Points d'attention
- Small 150×150mm work area
- Bluetooth/USB only — no WiFi
- Air assist sold as separate accessory
- Camera available as separate accessory only
Matériaux compatibles
LaserPecker LP1 Plus
BoisCuirPapierplasticAcryliqueTissufood
Sculpfun iCube Ultra 12W
BoisCuirAcryliqueCartonTissuPapierCaoutchoucPierreGravure métal
Le LaserPecker LP1 Plus coûte 219 $ (33 % de moins) que le Sculpfun iCube Ultra 12W, proposé à 329 $.
Le Sculpfun iCube Ultra 12W offre 95 % de puissance optique en plus (12W contre 0.6W).
Le Sculpfun iCube Ultra 12W propose une zone de travail 56 % plus grande (150 × 150 mm contre 100 × 100 mm).
Le LaserPecker LP1 Plus atteint une vitesse maximale 72 % supérieure (36,000 mm/min contre 10,000 mm/min).
Côté fonctionnalités, le Sculpfun iCube Ultra 12W dispose de un capot fermé, contrairement au LaserPecker LP1 Plus; le Sculpfun iCube Ultra 12W dispose de la compatibilité avec un accessoire rotatif, contrairement au LaserPecker LP1 Plus.