Glowforge Aura vs LaserPecker LP2 Plus
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 450 nm | 450 nm |
| Puissance optique | 6 W | 10 W |
| Performance | ||
| Zone de travail | 305 × 305 mm | 100 × 100 mm |
| Vitesse max | 15,000 mm/min | 240,000 mm/min |
| Mise au point | Mise au point auto | Manuelle |
| Fonctionnalités | ||
| Enceinte | Oui | Non |
| Assistance air | Non | Non |
| Compatible rotatif | Non | Oui |
| WiFi | Oui | Oui |
| Caméra | Oui | Non |
| Physique | ||
| Prix approx. | $1,199 | $799 |
| Année de sortie | 2023 | 2026 |
| Poids | 8.6 kg | 3.39 kg |
Avantages et inconvénients
Glowforge Aura
Ce qu'on aime
- Easiest setup and operation of any laser — no technical knowledge needed
- Cloud app with automatic material settings
- Built-in camera for precise placement
- Fully enclosed and safe
- Large design library available
Points d'attention
- Cloud-dependent — requires internet for every job
- Slower than modern competitors
- Only 6W — limited cutting ability
- Ongoing subscription costs for premium designs
- Not compatible with LightBurn
LaserPecker LP2 Plus
Ce qu'on aime
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Points d'attention
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Matériaux compatibles
Glowforge Aura
BoisCuirAcryliqueCartonTissuPapierCaoutchouc
LaserPecker LP2 Plus
BoisCuirAcryliquePapierPierreAluminium anodiséstainless steelVerreCaoutchouc
Le LaserPecker LP2 Plus coûte 799 $ (33 % de moins) que le Glowforge Aura, proposé à 1,199 $.
Le LaserPecker LP2 Plus offre 40 % de puissance optique en plus (10W contre 6W).
Le Glowforge Aura propose une zone de travail 89 % plus grande (305 × 305 mm contre 100 × 100 mm).
Le LaserPecker LP2 Plus atteint une vitesse maximale 94 % supérieure (240,000 mm/min contre 15,000 mm/min).
Côté fonctionnalités, le Glowforge Aura dispose de un capot fermé, contrairement au LaserPecker LP2 Plus; le Glowforge Aura dispose de une caméra, contrairement au LaserPecker LP2 Plus; le LaserPecker LP2 Plus dispose de la compatibilité avec un accessoire rotatif, contrairement au Glowforge Aura.