FLUX Lazervida 10W vs LaserPecker LP2 Plus
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 450 nm | 450 nm |
| Puissance optique | 10 W | 10 W |
| Performance | ||
| Zone de travail | 406 × 406 mm | 100 × 100 mm |
| Vitesse max | 18,000 mm/min | 240,000 mm/min |
| Mise au point | Manuelle | Manuelle |
| Fonctionnalités | ||
| Enceinte | Non | Non |
| Assistance air | Non | Non |
| Compatible rotatif | Oui | Oui |
| WiFi | Non | Oui |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $619 | $799 |
| Année de sortie | 2022 | 2026 |
| Poids | 4 kg | 3.39 kg |
Avantages et inconvénients
FLUX Lazervida 10W
Ce qu'on aime
- Very lightweight at just 4 kg — easy to move and store
- Large 406×406mm work area for the price
- Ultra-fine 0.08×0.08mm spot for detailed engraving
- Compatible with LightBurn and LaserGRBL in addition to Swiftray
- Optional enclosure, rotary, and air assist add-ons available
Points d'attention
- Open frame / Class 4 — requires safety goggles during operation
- USB only — no WiFi connectivity
- No built-in camera
- Manual focus only
- Primarily Japan-market; limited global distribution
LaserPecker LP2 Plus
Ce qu'on aime
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Points d'attention
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Matériaux compatibles
FLUX Lazervida 10W
BoisCuirAcryliqueCartonTissuPapierCaoutchoucPierreAluminium anodisé
LaserPecker LP2 Plus
BoisCuirAcryliquePapierPierreAluminium anodiséstainless steelVerreCaoutchouc
Le FLUX Lazervida 10W coûte 619 $ (23 % de moins) que le LaserPecker LP2 Plus, proposé à 799 $.
Les deux machines partagent la même puissance optique de 10W.
Le FLUX Lazervida 10W propose une zone de travail 94 % plus grande (406 × 406 mm contre 100 × 100 mm).
Le LaserPecker LP2 Plus atteint une vitesse maximale 93 % supérieure (240,000 mm/min contre 18,000 mm/min).
Côté fonctionnalités, le LaserPecker LP2 Plus dispose de la connectivité WiFi, contrairement au FLUX Lazervida 10W.