FLUX Ador vs Glowforge Spark
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 450 nm | 455 nm |
| Puissance optique | 10 W | 6 W |
| Performance | ||
| Zone de travail | 430 × 300 mm | 203 × 305 mm |
| Vitesse max | 24,000 mm/min | 8,000 mm/min |
| Mise au point | Mise au point auto | Mise au point auto |
| Fonctionnalités | ||
| Enceinte | Oui | Oui |
| Assistance air | Non | Non |
| Compatible rotatif | Oui | Non |
| WiFi | Oui | Oui |
| Caméra | Oui | Oui |
| Physique | ||
| Prix approx. | $1,399 | $899 |
| Année de sortie | 2023 | 2024 |
| Poids | 9 kg | 4.9 kg |
Avantages et inconvénients
FLUX Ador
Ce qu'on aime
- Quick-swap module system — laser, IR, and printing modules interchangeable
- Optional 20W module upgrade and 2W IR for bare metal marking
- Built-in 8MP camera for precise material placement
- Fully enclosed Class 1 design
- Optional CMYK color printing add-on — unique at this price
Points d'attention
- 10W base module; 20W upgrade costs an additional $699
- No built-in air assist
- Diode cannot engrave glass or cut thick acrylic as cleanly as CO2
- CMYK printing and 2W IR module sold separately
- LightBurn requires optional USB bridge cable
Glowforge Spark
Ce qu'on aime
- Easiest laser to get started with — ~30-minute setup
- Free Glowforge Print software works on any device (Mac, PC, tablet, phone)
- Built-in camera with live preview for material placement
- Class 1 enclosed — safe for home and classroom use
- Wide material library with auto-detected settings
Points d'attention
- Cloud-dependent — requires internet for every job
- Small 203×305mm cutting area for the price
- Only 6W — limited cut depth and no thick stock
- Subscription costs for premium design catalogue
- Not compatible with LightBurn
Matériaux compatibles
FLUX Ador
BoisCuirAcryliqueCartonTissuPapierCaoutchoucGravure métalAluminium anodisé
Glowforge Spark
BoisCuirAcryliqueCartonTissuPapierCaoutchouc
Le Glowforge Spark coûte 899 $ (36 % de moins) que le FLUX Ador, proposé à 1,399 $.
Le FLUX Ador offre 40 % de puissance optique en plus (10W contre 6W).
Le FLUX Ador propose une zone de travail 52 % plus grande (430 × 300 mm contre 203 × 305 mm).
Le FLUX Ador atteint une vitesse maximale 67 % supérieure (24,000 mm/min contre 8,000 mm/min).
Côté fonctionnalités, le FLUX Ador dispose de la compatibilité avec un accessoire rotatif, contrairement au Glowforge Spark.