Epilog Fusion Maker 12 40W CO2 vs xTool P3 80W CO2
| Laser | ||
| Type | CO2 Laser | CO2 Laser |
| Longueur d'onde | 10,600 nm | 10,600 nm |
| Puissance optique | 40 W | 80 W |
| Performance | ||
| Zone de travail | 610 × 305 mm | 915 × 458 mm |
| Vitesse max | 90,000 mm/min | 72,000 mm/min |
| Mise au point | Mise au point auto | Mise au point auto |
| Fonctionnalités | ||
| Enceinte | Oui | Oui |
| Assistance air | Non | Oui |
| Compatible rotatif | Oui | Oui |
| WiFi | Oui | Oui |
| Caméra | Oui | Oui |
| Physique | ||
| Prix approx. | $9,995 | $6,999 |
| Année de sortie | 2022 | 2025 |
| Poids | 63 kg | 105 kg |
Avantages et inconvénients
Epilog Fusion Maker 12 40W CO2
Ce qu'on aime
- Lowest-cost entry into Epilog's professional ecosystem
- IRIS™ camera included — precise artwork placement at this price is unusual
- Wireless + Ethernet + USB connectivity standard
- US-made with strong local support network
- Upgrade path within Epilog family
Points d'attention
- Slowest in Epilog lineup (60 IPS / 1.5 m/s) — stepper motors, not servo
- Air compressor not included (purchased separately)
- Smallest work area in the Epilog range
- Price is significantly above hobby CO2 desktops at similar specs
xTool P3 80W CO2
Ce qu'on aime
- 80W CO2 tube — cuts through thick materials quickly and cleanly
- Huge 915×458mm (36"×18") Class 1 enclosed work area
- Built-in inverter water chiller — no external chiller needed
- Dual cameras (5MP + 16MP) for precise auto-placement
- 220mm AutoLift Base for processing tall objects
- Optional automatic conveyor feeder for batch production
- Optional 5W IR module for metal marking
Points d'attention
- Extremely heavy at 105 kg — requires permanent installation
- High price at $6,999
- Large footprint (1250×780mm) — needs dedicated workspace
- CO2 tube and water chiller require periodic maintenance
- Mandatory ventilation setup
Matériaux compatibles
Epilog Fusion Maker 12 40W CO2
BoisAcryliqueCuirPapierplasticTissuVerrePierre
xTool P3 80W CO2
BoisAcryliqueCuirCartonTissuPapierCaoutchoucMousseVerrePierre
Le xTool P3 80W CO2 coûte 6,999 $ (30 % de moins) que le Epilog Fusion Maker 12 40W CO2, proposé à 9,995 $.
Le xTool P3 80W CO2 offre 50 % de puissance optique en plus (80W contre 40W).
Le xTool P3 80W CO2 propose une zone de travail 56 % plus grande (915 × 458 mm contre 610 × 305 mm).
Le Epilog Fusion Maker 12 40W CO2 atteint une vitesse maximale 20 % supérieure (90,000 mm/min contre 72,000 mm/min).
Côté fonctionnalités, le xTool P3 80W CO2 dispose de l'assistance air, contrairement au Epilog Fusion Maker 12 40W CO2.