Epilog Fusion Maker 12 40W CO2 vs xTool P2 55W CO2
| Laser | ||
| Type | CO2 Laser | CO2 Laser |
| Longueur d'onde | 10,600 nm | 10,600 nm |
| Puissance optique | 40 W | 55 W |
| Performance | ||
| Zone de travail | 610 × 305 mm | 600 × 308 mm |
| Vitesse max | 90,000 mm/min | 36,000 mm/min |
| Mise au point | Mise au point auto | Mise au point auto |
| Fonctionnalités | ||
| Enceinte | Oui | Oui |
| Assistance air | Non | Oui |
| Compatible rotatif | Oui | Oui |
| WiFi | Oui | Oui |
| Caméra | Oui | Oui |
| Physique | ||
| Prix approx. | $9,995 | $4,999 |
| Année de sortie | 2022 | 2023 |
| Poids | 63 kg | 45 kg |
Avantages et inconvénients
Epilog Fusion Maker 12 40W CO2
Ce qu'on aime
- Lowest-cost entry into Epilog's professional ecosystem
- IRIS™ camera included — precise artwork placement at this price is unusual
- Wireless + Ethernet + USB connectivity standard
- US-made with strong local support network
- Upgrade path within Epilog family
Points d'attention
- Slowest in Epilog lineup (60 IPS / 1.5 m/s) — stepper motors, not servo
- Air compressor not included (purchased separately)
- Smallest work area in the Epilog range
- Price is significantly above hobby CO2 desktops at similar specs
xTool P2 55W CO2
Ce qu'on aime
- 55W CO2 tube cuts thick materials cleanly
- Built-in camera for auto-trace and positioning
- Pass-through slot for oversized materials
- Autofocus and air assist included
- Comprehensive safety features (lid detection, flame sensor)
Points d'attention
- Very high price ($4,999)
- Heavy and large footprint
- CO2 tube will eventually need replacing
- Requires proper ventilation setup
Matériaux compatibles
Epilog Fusion Maker 12 40W CO2
BoisAcryliqueCuirPapierplasticTissuVerrePierre
xTool P2 55W CO2
BoisAcryliqueCuirCartonTissuPapierCaoutchoucMousseVerrePierre
Le xTool P2 55W CO2 coûte 4,999 $ (50 % de moins) que le Epilog Fusion Maker 12 40W CO2, proposé à 9,995 $.
Le xTool P2 55W CO2 offre 27 % de puissance optique en plus (55W contre 40W).
Le Epilog Fusion Maker 12 40W CO2 propose une zone de travail 1 % plus grande (610 × 305 mm contre 600 × 308 mm).
Le Epilog Fusion Maker 12 40W CO2 atteint une vitesse maximale 60 % supérieure (90,000 mm/min contre 36,000 mm/min).
Côté fonctionnalités, le xTool P2 55W CO2 dispose de l'assistance air, contrairement au Epilog Fusion Maker 12 40W CO2.