Creality CR-Laser Falcon 10W vs Sculpfun iCube Ultra 12W
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 455 nm | 455 nm |
| Puissance optique | 10 W | 12 W |
| Performance | ||
| Zone de travail | 400 × 415 mm | 150 × 150 mm |
| Vitesse max | 20,000 mm/min | 10,000 mm/min |
| Mise au point | Manuelle | Mise au point auto |
| Fonctionnalités | ||
| Enceinte | Non | Oui |
| Assistance air | Non | Non |
| Compatible rotatif | Oui | Oui |
| WiFi | Non | Non |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $199 | $329 |
| Année de sortie | 2022 | 2025 |
| Poids | 3.2 kg | 5.95 kg |
Avantages et inconvénients
Creality CR-Laser Falcon 10W
Ce qu'on aime
- Meaningful power step up from the 5W at a similarly low $199 price
- Cuts 6mm basswood or 5mm black acrylic in a single pass
- Same large 400×415mm work area
- Light and portable at 3.2kg
Points d'attention
- Class 4 (FDA) open-beam laser — safety glasses required and sold separately
- No air assist, camera, or WiFi included
- Manual focus only
- Oldest design generation in the current lineup
Sculpfun iCube Ultra 12W
Ce qu'on aime
- Class 1 safety certification — fully enclosed, door-interlock protected
- 12W diode cuts 10mm paulownia in one pass
- Built-in multi-layer smoke filtration system
- Compact and portable at 5.95 kg — smallest 12W enclosed laser
- Auto-focus for hands-off setup
- Optional dual-laser version adds 1.2W IR for marking metals
Points d'attention
- Small 150×150mm work area
- Bluetooth/USB only — no WiFi
- Air assist sold as separate accessory
- Camera available as separate accessory only
Matériaux compatibles
Creality CR-Laser Falcon 10W
BoisAcryliqueCuirCartonTissuPapierCaoutchoucPierre
Sculpfun iCube Ultra 12W
BoisCuirAcryliqueCartonTissuPapierCaoutchoucPierreGravure métal
Le Creality CR-Laser Falcon 10W coûte 199 $ (40 % de moins) que le Sculpfun iCube Ultra 12W, proposé à 329 $.
Le Sculpfun iCube Ultra 12W offre 17 % de puissance optique en plus (12W contre 10W).
Le Creality CR-Laser Falcon 10W propose une zone de travail 86 % plus grande (400 × 415 mm contre 150 × 150 mm).
Le Creality CR-Laser Falcon 10W atteint une vitesse maximale 50 % supérieure (20,000 mm/min contre 10,000 mm/min).
Côté fonctionnalités, le Sculpfun iCube Ultra 12W dispose de un capot fermé, contrairement au Creality CR-Laser Falcon 10W.