Creality CR-Laser Falcon 10W vs LaserPecker LP1 Plus
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 455 nm | 405 nm |
| Puissance optique | 10 W | 0.6 W |
| Performance | ||
| Zone de travail | 400 × 415 mm | 100 × 100 mm |
| Vitesse max | 20,000 mm/min | 36,000 mm/min |
| Mise au point | Manuelle | Manuelle |
| Fonctionnalités | ||
| Enceinte | Non | Non |
| Assistance air | Non | Non |
| Compatible rotatif | Oui | Non |
| WiFi | Non | Non |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $199 | $219 |
| Année de sortie | 2022 | 2026 |
| Poids | 3.2 kg | 0.72 kg |
Avantages et inconvénients
Creality CR-Laser Falcon 10W
Ce qu'on aime
- Meaningful power step up from the 5W at a similarly low $199 price
- Cuts 6mm basswood or 5mm black acrylic in a single pass
- Same large 400×415mm work area
- Light and portable at 3.2kg
Points d'attention
- Class 4 (FDA) open-beam laser — safety glasses required and sold separately
- No air assist, camera, or WiFi included
- Manual focus only
- Oldest design generation in the current lineup
LaserPecker LP1 Plus
Ce qu'on aime
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Points d'attention
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Matériaux compatibles
Creality CR-Laser Falcon 10W
BoisAcryliqueCuirCartonTissuPapierCaoutchoucPierre
LaserPecker LP1 Plus
BoisCuirPapierplasticAcryliqueTissufood
Le Creality CR-Laser Falcon 10W coûte 199 $ (9 % de moins) que le LaserPecker LP1 Plus, proposé à 219 $.
Le Creality CR-Laser Falcon 10W offre 94 % de puissance optique en plus (10W contre 0.6W).
Le Creality CR-Laser Falcon 10W propose une zone de travail 94 % plus grande (400 × 415 mm contre 100 × 100 mm).
Le LaserPecker LP1 Plus atteint une vitesse maximale 44 % supérieure (36,000 mm/min contre 20,000 mm/min).
Côté fonctionnalités, le Creality CR-Laser Falcon 10W dispose de la compatibilité avec un accessoire rotatif, contrairement au LaserPecker LP1 Plus.