AlgoLaser Pixi 3W vs Sculpfun S9
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 450 nm | 450 nm |
| Puissance optique | 3 W | 5.5 W |
| Performance | ||
| Zone de travail | 100 × 100 mm | 410 × 415 mm |
| Vitesse max | 6,000 mm/min | 6,000 mm/min |
| Mise au point | Fixe | Manuelle |
| Fonctionnalités | ||
| Enceinte | Oui | Non |
| Assistance air | Non | Non |
| Compatible rotatif | Oui | Oui |
| WiFi | Oui | Non |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $179 | $189 |
| Année de sortie | 2025 | 2022 |
| Poids | 3.75 kg | 3 kg |
Avantages et inconvénients
AlgoLaser Pixi 3W
Ce qu'on aime
- Fully enclosed — safe for indoor/tabletop use
- Camera-assisted autofocus — no manual focusing
- Compact and portable
- CNET-recognized for ease of use
Points d'attention
- Small work area limits project size
- Low power (3W base) restricts materials to soft/thin items
- Not intended for cutting — engraving only at this power tier
Sculpfun S9
Ce qu'on aime
- Excellent value at under $200
- Ultra-thin 0.06mm compressed spot
- Easy 20-minute assembly
- Compatible with LightBurn, LaserGRBL
- Cuts 8mm pine cleanly
Points d'attention
- No air assist or enclosure
- No WiFi connectivity
- Open frame requires safe operating environment
Matériaux compatibles
AlgoLaser Pixi 3W
BoisCuirCartonPapierCaoutchouc
Sculpfun S9
BoisCuirCartonTissuPapierCaoutchoucAcrylique
Le AlgoLaser Pixi 3W coûte 179 $ (5 % de moins) que le Sculpfun S9, proposé à 189 $.
Le Sculpfun S9 offre 45 % de puissance optique en plus (5.5W contre 3W).
Le Sculpfun S9 propose une zone de travail 94 % plus grande (410 × 415 mm contre 100 × 100 mm).
Les deux machines partagent la même vitesse maximale de 6,000 mm/min.
Côté fonctionnalités, le AlgoLaser Pixi 3W dispose de un capot fermé, contrairement au Sculpfun S9; le AlgoLaser Pixi 3W dispose de la connectivité WiFi, contrairement au Sculpfun S9.