AlgoLaser Pixi 1.5W 1064nm Infrared vs Genmitsu Z5-1 Fiber
| Laser | ||
| Type | Fiber Laser | Fiber Laser |
| Longueur d'onde | 1,064 nm | 1,064 nm |
| Puissance optique | 1.5 W | 2 W |
| Performance | ||
| Zone de travail | 100 × 100 mm | 70 × 70 mm |
| Vitesse max | 6,000 mm/min | 600,000 mm/min |
| Mise au point | Manuelle | Fixe |
| Fonctionnalités | ||
| Enceinte | Oui | Non |
| Assistance air | Non | Non |
| Compatible rotatif | Oui | Non |
| WiFi | Oui | Non |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $379 | $949 |
| Année de sortie | 2025 | 2023 |
| Poids | 3.2 kg | 4.3 kg |
AlgoLaser Pixi 1.5W 1064nm Infrared
Ce qu'on aime
- Marks bare metal and anodized aluminum — not possible with blue-diode Pixi
- Same enclosed, touchscreen convenience as the standard Pixi
- Compact and portable
- Good entry point into metal marking without a full galvo fiber setup
Points d'attention
- Cannot engrave wood, leather, or acrylic — infrared-only use case
- Very low power (1.5W) limits marking depth and speed
- Small work area
- Pricier than the standard blue-diode Pixi
Genmitsu Z5-1 Fiber
Ce qu'on aime
- 2-in-1: desktop stand or handheld for marking irregular objects
- Galvo head at 10,000mm/s for fast metal marking
- 4K marking resolution (0.001mm spot)
- Marks all metals, stone, and rubber without coating
- Budget entry into fiber marking at $949
Points d'attention
- Very small 70x70mm marking area
- Only 2W — cannot engrave deeply or cut
- No enclosure — eye protection required
- Not suitable for wood or acrylic
- Limited compared to higher-wattage fiber machines
AlgoLaser Pixi 1.5W 1064nm Infrared
Genmitsu Z5-1 Fiber
Le AlgoLaser Pixi 1.5W 1064nm Infrared coûte 379 $ (60 % de moins) que le Genmitsu Z5-1 Fiber, proposé à 949 $.
Le Genmitsu Z5-1 Fiber offre 25 % de puissance optique en plus (2W contre 1.5W).
Le AlgoLaser Pixi 1.5W 1064nm Infrared propose une zone de travail 51 % plus grande (100 × 100 mm contre 70 × 70 mm).
Le Genmitsu Z5-1 Fiber atteint une vitesse maximale 99 % supérieure (600,000 mm/min contre 6,000 mm/min).
Côté fonctionnalités, le AlgoLaser Pixi 1.5W 1064nm Infrared dispose de un capot fermé, contrairement au Genmitsu Z5-1 Fiber; le AlgoLaser Pixi 1.5W 1064nm Infrared dispose de la connectivité WiFi, contrairement au Genmitsu Z5-1 Fiber; le AlgoLaser Pixi 1.5W 1064nm Infrared dispose de la compatibilité avec un accessoire rotatif, contrairement au Genmitsu Z5-1 Fiber.