AlgoLaser DIY KIT MK3 20W vs LaserPecker LP2 Plus
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 450 nm | 450 nm |
| Puissance optique | 20 W | 10 W |
| Performance | ||
| Zone de travail | 400 × 400 mm | 100 × 100 mm |
| Vitesse max | 15,000 mm/min | 240,000 mm/min |
| Mise au point | Manuelle | Manuelle |
| Fonctionnalités | ||
| Enceinte | Non | Non |
| Assistance air | Non | Non |
| Compatible rotatif | Oui | Oui |
| WiFi | Oui | Oui |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $529 | $799 |
| Année de sortie | 2026 | 2026 |
| Poids | 6 kg | 3.39 kg |
Avantages et inconvénients
AlgoLaser DIY KIT MK3 20W
Ce qu'on aime
- Widest power range of the DIY KIT family (8W/15W/20W)
- Newest generation — likely incorporates build-quality refinements over MK2
- Rotary compatible
- Competitively priced for the power on offer
Points d'attention
- Newly released — limited independent long-term reviews available
- Exact speed, connectivity, and camera specs not confirmed from AlgoLaser's text content — verify before publishing
- Open frame, no enclosure standard
LaserPecker LP2 Plus
Ce qu'on aime
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Points d'attention
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Matériaux compatibles
AlgoLaser DIY KIT MK3 20W
BoisAcryliqueCuirCartonTissuPapierCaoutchouc
LaserPecker LP2 Plus
BoisCuirAcryliquePapierPierreAluminium anodiséstainless steelVerreCaoutchouc
Le AlgoLaser DIY KIT MK3 20W coûte 529 $ (34 % de moins) que le LaserPecker LP2 Plus, proposé à 799 $.
Le AlgoLaser DIY KIT MK3 20W offre 50 % de puissance optique en plus (20W contre 10W).
Le AlgoLaser DIY KIT MK3 20W propose une zone de travail 94 % plus grande (400 × 400 mm contre 100 × 100 mm).
Le LaserPecker LP2 Plus atteint une vitesse maximale 94 % supérieure (240,000 mm/min contre 15,000 mm/min).