AlgoLaser DIY KIT MK2 10W Extended (15.7"×34.6") vs LaserPecker LP1 Plus
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 450 nm | 405 nm |
| Puissance optique | 10 W | 0.6 W |
| Performance | ||
| Zone de travail | 400 × 880 mm | 100 × 100 mm |
| Vitesse max | 12,000 mm/min | 36,000 mm/min |
| Mise au point | Manuelle | Manuelle |
| Fonctionnalités | ||
| Enceinte | Non | Non |
| Assistance air | Non | Non |
| Compatible rotatif | Non | Non |
| WiFi | Oui | Non |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $369 | $219 |
| Année de sortie | 2024 | 2026 |
| Poids | 4 kg | 0.72 kg |
Avantages et inconvénients
AlgoLaser DIY KIT MK2 10W Extended (15.7"×34.6")
Ce qu'on aime
- Longest bed in the DIY KIT MK2 family
- Same fixed 10W module as the standard MK2
- Rotary compatible
Points d'attention
- No smart features
- Bigger footprint required
- No enclosure standard
LaserPecker LP1 Plus
Ce qu'on aime
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Points d'attention
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Matériaux compatibles
AlgoLaser DIY KIT MK2 10W Extended (15.7"×34.6")
BoisAcryliqueCuirCartonTissuPapierCaoutchouc
LaserPecker LP1 Plus
BoisCuirPapierplasticAcryliqueTissufood
Le LaserPecker LP1 Plus coûte 219 $ (41 % de moins) que le AlgoLaser DIY KIT MK2 10W Extended (15.7"×34.6"), proposé à 369 $.
Le AlgoLaser DIY KIT MK2 10W Extended (15.7"×34.6") offre 94 % de puissance optique en plus (10W contre 0.6W).
Le AlgoLaser DIY KIT MK2 10W Extended (15.7"×34.6") propose une zone de travail 97 % plus grande (400 × 880 mm contre 100 × 100 mm).
Le LaserPecker LP1 Plus atteint une vitesse maximale 67 % supérieure (36,000 mm/min contre 12,000 mm/min).
Côté fonctionnalités, le AlgoLaser DIY KIT MK2 10W Extended (15.7"×34.6") dispose de la connectivité WiFi, contrairement au LaserPecker LP1 Plus.