AlgoLaser DIY KIT Extended 5W (15.7"×33.5") vs LaserPecker LP1 Plus
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 455 nm | 405 nm |
| Puissance optique | 5 W | 0.6 W |
| Performance | ||
| Zone de travail | 400 × 850 mm | 100 × 100 mm |
| Vitesse max | 12,000 mm/min | 36,000 mm/min |
| Mise au point | Manuelle | Manuelle |
| Fonctionnalités | ||
| Enceinte | Non | Non |
| Assistance air | Non | Non |
| Compatible rotatif | Non | Non |
| WiFi | Oui | Non |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $289 | $219 |
| Année de sortie | 2024 | 2026 |
| Poids | 3.9 kg | 0.72 kg |
Avantages et inconvénients
AlgoLaser DIY KIT Extended 5W (15.7"×33.5")
Ce qu'on aime
- Longer bed than the standard DIY KIT for bigger projects
- Budget-friendly for the extra work area gained
- Same simple GRBL operation as the standard kit
Points d'attention
- Camera, air pump are sold separately
- Larger footprint needed on the desk/bench
LaserPecker LP1 Plus
Ce qu'on aime
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Points d'attention
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Matériaux compatibles
AlgoLaser DIY KIT Extended 5W (15.7"×33.5")
BoisCuirCartonTissuPapierCaoutchouc
LaserPecker LP1 Plus
BoisCuirPapierplasticAcryliqueTissufood
Le LaserPecker LP1 Plus coûte 219 $ (24 % de moins) que le AlgoLaser DIY KIT Extended 5W (15.7"×33.5"), proposé à 289 $.
Le AlgoLaser DIY KIT Extended 5W (15.7"×33.5") offre 88 % de puissance optique en plus (5W contre 0.6W).
Le AlgoLaser DIY KIT Extended 5W (15.7"×33.5") propose une zone de travail 97 % plus grande (400 × 850 mm contre 100 × 100 mm).
Le LaserPecker LP1 Plus atteint une vitesse maximale 67 % supérieure (36,000 mm/min contre 12,000 mm/min).
Côté fonctionnalités, le AlgoLaser DIY KIT Extended 5W (15.7"×33.5") dispose de la connectivité WiFi, contrairement au LaserPecker LP1 Plus.