AlgoLaser Alpha MK2 40W Extended (15.7"×33.5") vs LaserPecker LP2 Plus
| Laser | ||
| Type | Diode Laser | Diode Laser |
| Longueur d'onde | 450 nm | 450 nm |
| Puissance optique | 40 W | 10 W |
| Performance | ||
| Zone de travail | 400 × 850 mm | 100 × 100 mm |
| Vitesse max | 20,000 mm/min | 240,000 mm/min |
| Mise au point | Manuelle | Manuelle |
| Fonctionnalités | ||
| Enceinte | Non | Non |
| Assistance air | Oui | Non |
| Compatible rotatif | Oui | Oui |
| WiFi | Oui | Oui |
| Caméra | Non | Non |
| Physique | ||
| Prix approx. | $1,118 | $799 |
| Année de sortie | 2024 | 2026 |
| Poids | 8.4 kg | 3.39 kg |
Avantages et inconvénients
AlgoLaser Alpha MK2 40W Extended (15.7"×33.5")
Ce qu'on aime
- Extended bed nearly doubles usable length over the standard 40W Alpha MK2
- 40W handles thicker cuts than the 20W extended model
- Same touchscreen smart features
- Automatic air assist included
Points d'attention
- Largest footprint in the open-frame Alpha MK2 lineup
- Most expensive open-frame Alpha MK2 configuration
- No enclosure on this configuration
LaserPecker LP2 Plus
Ce qu'on aime
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Points d'attention
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Matériaux compatibles
AlgoLaser Alpha MK2 40W Extended (15.7"×33.5")
BoisAcryliqueCuirCartonTissuPapierCaoutchouc
LaserPecker LP2 Plus
BoisCuirAcryliquePapierPierreAluminium anodiséstainless steelVerreCaoutchouc
Le LaserPecker LP2 Plus coûte 799 $ (29 % de moins) que le AlgoLaser Alpha MK2 40W Extended (15.7"×33.5"), proposé à 1,118 $.
Le AlgoLaser Alpha MK2 40W Extended (15.7"×33.5") offre 75 % de puissance optique en plus (40W contre 10W).
Le AlgoLaser Alpha MK2 40W Extended (15.7"×33.5") propose une zone de travail 97 % plus grande (400 × 850 mm contre 100 × 100 mm).
Le LaserPecker LP2 Plus atteint une vitesse maximale 92 % supérieure (240,000 mm/min contre 20,000 mm/min).
Côté fonctionnalités, le AlgoLaser Alpha MK2 40W Extended (15.7"×33.5") dispose de l'assistance air, contrairement au LaserPecker LP2 Plus.