LaserPecker LP1 Plus vs Sculpfun S9
| Láser | ||
| Tipo | Diode Laser | Diode Laser |
| Longitud de onda | 405 nm | 450 nm |
| Potencia óptica | 0.6 W | 5.5 W |
| Rendimiento | ||
| Área de trabajo | 100 × 100 mm | 410 × 415 mm |
| Velocidad máx. | 36,000 mm/min | 6,000 mm/min |
| Enfoque | Manual | Manual |
| Funciones | ||
| Carcasa | No | No |
| Asistencia de aire | No | No |
| Compatible con rotativo | No | Sí |
| WiFi | No | No |
| Cámara | No | No |
| Físico | ||
| Precio aprox. | $219 | $189 |
| Año de lanzamiento | 2026 | 2022 |
| Peso | 0.72 kg | 3 kg |
Ventajas e inconvenientes
LaserPecker LP1 Plus
Lo que nos gusta
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Hay que tener en cuenta
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Sculpfun S9
Lo que nos gusta
- Excellent value at under $200
- Ultra-thin 0.06mm compressed spot
- Easy 20-minute assembly
- Compatible with LightBurn, LaserGRBL
- Cuts 8mm pine cleanly
Hay que tener en cuenta
- No air assist or enclosure
- No WiFi connectivity
- Open frame requires safe operating environment
Materiales compatibles
LaserPecker LP1 Plus
MaderaCueroPapelplasticAcrílicoTelafood
Sculpfun S9
MaderaCueroCartónTelaPapelGomaAcrílico
El Sculpfun S9 cuesta $189 (un 14% menos) que el LaserPecker LP1 Plus, que tiene un precio de $219.
El Sculpfun S9 tiene un 89% más de potencia óptica (5.5W frente a 0.6W).
El Sculpfun S9 ofrece un área de trabajo un 94% mayor (410 × 415 mm frente a 100 × 100 mm).
El LaserPecker LP1 Plus alcanza una velocidad máxima un 83% superior (36,000 mm/min frente a 6,000 mm/min).
En cuanto a funciones, el Sculpfun S9 incluye compatibilidad con accesorio rotativo, mientras que el LaserPecker LP1 Plus no.