Creality Falcon2 Pro 40W vs xTool S1 40W
| Láser | ||
| Tipo | Diode Laser | Diode Laser |
| Longitud de onda | 455 nm | 455 nm |
| Potencia óptica | 40 W | 40 W |
| Rendimiento | ||
| Área de trabajo | 400 × 415 mm | 498 × 319 mm |
| Velocidad máx. | 36,000 mm/min | 36,000 mm/min |
| Enfoque | Manual | Autoenfoque |
| Funciones | ||
| Carcasa | Sí | Sí |
| Asistencia de aire | Sí | Sí |
| Compatible con rotativo | Sí | Sí |
| WiFi | No | Sí |
| Cámara | Sí | Sí |
| Físico | ||
| Precio aprox. | $1,599 | $2,499 |
| Año de lanzamiento | 2024 | 2024 |
| Peso | 18.56 kg | 20 kg |
Ventajas e inconvenientes
Creality Falcon2 Pro 40W
Lo que nos gusta
- Includes a bonus 1.6W fine-detail laser module (not bundled with the 22W)
- 600mm/s CoreXY speed with enclosed camera positioning
- Deep cutting power at 40W inside a Class 1 enclosure
- Air assist and multi-point safety monitoring standard
Hay que tener en cuenta
- No autofocus — manual leveling despite Pro branding
- No WiFi
- Pricier than the 22W tier for buyers who don't need the extra power
xTool S1 40W
Lo que nos gusta
- Cuts 18mm wood and 15mm acrylic in one pass
- Can mark and score thin stainless steel
- Full Class 1 enclosure — no safety glasses required
- Built-in camera for precise placement
- Autofocus and air assist included
- Same fast 36,000 mm/min (600 mm/s) speed as 20W
Hay que tener en cuenta
- Significantly pricier than the 20W variant
- Heavier than open-frame equivalents
- Enclosure limits maximum material height
- Diode still falls short of CO₂ for thick acrylic or glass
Materiales compatibles
Creality Falcon2 Pro 40W
MaderaAcrílicoCueroCartónTelaPapelGomaPiedraGrabado metal
xTool S1 40W
MaderaAcrílicoCueroCartónTelaPapelGomaPiedraGrabado metalAluminio anodizadostainless steel
El Creality Falcon2 Pro 40W cuesta $1,599 (un 36% menos) que el xTool S1 40W, que tiene un precio de $2,499.
Ambas máquinas comparten la misma potencia óptica de 40W.
El Creality Falcon2 Pro 40W ofrece un área de trabajo un 4% mayor (400 × 415 mm frente a 498 × 319 mm).
Ambas máquinas comparten la misma velocidad máxima de 36,000 mm/min.
En cuanto a funciones, el xTool S1 40W incluye conectividad WiFi, mientras que el Creality Falcon2 Pro 40W no.