Creality CR-Laser Falcon 10W vs LaserPecker LP1 Plus
| Láser | ||
| Tipo | Diode Laser | Diode Laser |
| Longitud de onda | 455 nm | 405 nm |
| Potencia óptica | 10 W | 0.6 W |
| Rendimiento | ||
| Área de trabajo | 400 × 415 mm | 100 × 100 mm |
| Velocidad máx. | 20,000 mm/min | 36,000 mm/min |
| Enfoque | Manual | Manual |
| Funciones | ||
| Carcasa | No | No |
| Asistencia de aire | No | No |
| Compatible con rotativo | Sí | No |
| WiFi | No | No |
| Cámara | No | No |
| Físico | ||
| Precio aprox. | $199 | $219 |
| Año de lanzamiento | 2022 | 2026 |
| Peso | 3.2 kg | 0.72 kg |
Ventajas e inconvenientes
Creality CR-Laser Falcon 10W
Lo que nos gusta
- Meaningful power step up from the 5W at a similarly low $199 price
- Cuts 6mm basswood or 5mm black acrylic in a single pass
- Same large 400×415mm work area
- Light and portable at 3.2kg
Hay que tener en cuenta
- Class 4 (FDA) open-beam laser — safety glasses required and sold separately
- No air assist, camera, or WiFi included
- Manual focus only
- Oldest design generation in the current lineup
LaserPecker LP1 Plus
Lo que nos gusta
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Hay que tener en cuenta
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Materiales compatibles
Creality CR-Laser Falcon 10W
MaderaAcrílicoCueroCartónTelaPapelGomaPiedra
LaserPecker LP1 Plus
MaderaCueroPapelplasticAcrílicoTelafood
El Creality CR-Laser Falcon 10W cuesta $199 (un 9% menos) que el LaserPecker LP1 Plus, que tiene un precio de $219.
El Creality CR-Laser Falcon 10W tiene un 94% más de potencia óptica (10W frente a 0.6W).
El Creality CR-Laser Falcon 10W ofrece un área de trabajo un 94% mayor (400 × 415 mm frente a 100 × 100 mm).
El LaserPecker LP1 Plus alcanza una velocidad máxima un 44% superior (36,000 mm/min frente a 20,000 mm/min).
En cuanto a funciones, el Creality CR-Laser Falcon 10W incluye compatibilidad con accesorio rotativo, mientras que el LaserPecker LP1 Plus no.