AlgoLaser DIY KIT MK3 8W vs LaserPecker LP1 Plus
| Láser | ||
| Tipo | Diode Laser | Diode Laser |
| Longitud de onda | 450 nm | 405 nm |
| Potencia óptica | 8 W | 0.6 W |
| Rendimiento | ||
| Área de trabajo | 400 × 400 mm | 100 × 100 mm |
| Velocidad máx. | 15,000 mm/min | 36,000 mm/min |
| Enfoque | Manual | Manual |
| Funciones | ||
| Carcasa | No | No |
| Asistencia de aire | No | No |
| Compatible con rotativo | Sí | No |
| WiFi | Sí | No |
| Cámara | No | No |
| Físico | ||
| Precio aprox. | $299 | $219 |
| Año de lanzamiento | 2026 | 2026 |
| Peso | 6 kg | 0.72 kg |
Ventajas e inconvenientes
AlgoLaser DIY KIT MK3 8W
Lo que nos gusta
- Widest power range of the DIY KIT family (8W/15W/20W)
- Newest generation — likely incorporates build-quality refinements over MK2
- Rotary compatible
- Competitively priced for the power on offer
Hay que tener en cuenta
- Newly released — limited independent long-term reviews available
- Exact speed, connectivity, and camera specs not confirmed from AlgoLaser's text content — verify before publishing
- Open frame, no enclosure standard
LaserPecker LP1 Plus
Lo que nos gusta
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Hay que tener en cuenta
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Materiales compatibles
AlgoLaser DIY KIT MK3 8W
MaderaAcrílicoCueroCartónTelaPapelGoma
LaserPecker LP1 Plus
MaderaCueroPapelplasticAcrílicoTelafood
El LaserPecker LP1 Plus cuesta $219 (un 27% menos) que el AlgoLaser DIY KIT MK3 8W, que tiene un precio de $299.
El AlgoLaser DIY KIT MK3 8W tiene un 93% más de potencia óptica (8W frente a 0.6W).
El AlgoLaser DIY KIT MK3 8W ofrece un área de trabajo un 94% mayor (400 × 400 mm frente a 100 × 100 mm).
El LaserPecker LP1 Plus alcanza una velocidad máxima un 58% superior (36,000 mm/min frente a 15,000 mm/min).
En cuanto a funciones, el AlgoLaser DIY KIT MK3 8W incluye conectividad WiFi, mientras que el LaserPecker LP1 Plus no; el AlgoLaser DIY KIT MK3 8W incluye compatibilidad con accesorio rotativo, mientras que el LaserPecker LP1 Plus no.