Diode Laser Creality Einsteiger
Creality Falcon2 Pro S 22W
$1,099
ungefährer Straßenpreis The Creality Falcon2 Pro S 22W adds genuine one-click Z-axis auto focus via its integrated camera — the key upgrade over the base Falcon2 Pro 22W. The trade-off is a smaller 355×390mm work area, and it is not compatible with the 1.6W bonus module accessory that base Pro units support. Cuts up to 15mm basswood or 10mm black acrylic in a single pass.
Vollständige Spezifikationen
| Laser | |
| Typ | Diode Laser |
| Wellenlänge | 455 nm |
| Optische Leistung | 22 W |
| Leistung | |
| Arbeitsbereich | 355 × 390 mm |
| Höchstgeschwindigkeit | 36,000 mm/min |
| Fokus | Autofokus |
| Funktionen | |
| Gehäuse | Ja |
| Luftunterstützung | Ja |
| Rotationsaufsatz-kompatibel | Ja |
| WLAN | Nein |
| Kamera | Ja |
| Physisch | |
| Ca.-Preis | $1,099 |
| Erscheinungsjahr | 2025 |
| Gewicht | 18.8 kg |
Vor- und Nachteile
Was uns gefällt
- Genuine one-click Z-axis autofocus — real time savings over manual leveling
- Enclosed Class 1 design with camera and air assist standard
- Cuts 15mm basswood or 10mm black acrylic in a single pass
Achtung
- Smaller 355×390mm work area than the cheaper base Pro 22W (400×415mm)
- Not compatible with the 1.6W fine-detail bonus module
- At least one reviewer notes the autofocus isn't fully hands-off in practice
Kompatible Materialien
HolzAcrylLederPappeStoffPapierGummiStein
Am besten geeignet für
Mit ähnlich bepreisten Maschinen vergleichen
- xTool S1 20W $1,099 Vollständiger Vergleich →
- Creality Falcon A1 Pro 20W $1,099 Vollständiger Vergleich →
- LaserPecker LP4 $1,099 Vollständiger Vergleich →
Ähnliche Maschinen
