Snapmaker Ray 40W vs. xTool S1 40W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 455 nm |
| Optische Leistung | 40 W | 40 W |
| Leistung | ||
| Arbeitsbereich | 400 × 600 mm | 498 × 319 mm |
| Höchstgeschwindigkeit | 30,000 mm/min | 36,000 mm/min |
| Fokus | Manuell | Autofokus |
| Funktionen | ||
| Gehäuse | Nein | Ja |
| Luftunterstützung | Ja | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Ja |
| Kamera | Nein | Ja |
| Physisch | ||
| Ca.-Preis | $1,699 | $2,499 |
| Erscheinungsjahr | 2023 | 2024 |
| Gewicht | 15.06 kg | 20 kg |
Vor- und Nachteile
Snapmaker Ray 40W
Was uns gefällt
- Cuts up to 15mm basswood in a single pass
- Smart Air Assist pump included in box
- Large 400×600mm work area
- Wi-Fi + USB connectivity with LightBurn support
- FDA Class 1 certified with optional enclosure
Achtung
- No autofocus (manual focus lever)
- No built-in enclosure (sold separately)
- No camera module
- Laser-only (no 3-in-1 like Artisan)
xTool S1 40W
Was uns gefällt
- Cuts 18mm wood and 15mm acrylic in one pass
- Can mark and score thin stainless steel
- Full Class 1 enclosure — no safety glasses required
- Built-in camera for precise placement
- Autofocus and air assist included
- Same fast 36,000 mm/min (600 mm/s) speed as 20W
Achtung
- Significantly pricier than the 20W variant
- Heavier than open-frame equivalents
- Enclosure limits maximum material height
- Diode still falls short of CO₂ for thick acrylic or glass
Kompatible Materialien
Snapmaker Ray 40W
HolzAcrylLederStoffPapierEloxiertes AluminiumMetallgravur
xTool S1 40W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravurEloxiertes Aluminiumstainless steel
Snapmaker Ray 40W kostet $1,699 (32% weniger) als xTool S1 40W, das $2,499 kostet.
Beide Maschinen haben die gleiche optische Leistung von 40W.
Snapmaker Ray 40W bietet einen 34% größeren Arbeitsbereich (400 × 600 mm vs. 498 × 319 mm).
xTool S1 40W hat eine 17% höhere Höchstgeschwindigkeit (36,000 mm/min vs. 30,000 mm/min).
Bei den Funktionen gilt: xTool S1 40W verfügt über ein geschlossenes Gehäuse, Snapmaker Ray 40W nicht; xTool S1 40W verfügt über eine Kamera, Snapmaker Ray 40W nicht.