Snapmaker Ray 20W vs. xTool S1 40W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 455 nm |
| Optische Leistung | 20 W | 40 W |
| Leistung | ||
| Arbeitsbereich | 400 × 600 mm | 498 × 319 mm |
| Höchstgeschwindigkeit | 30,000 mm/min | 36,000 mm/min |
| Fokus | Manuell | Autofokus |
| Funktionen | ||
| Gehäuse | Nein | Ja |
| Luftunterstützung | Ja | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Ja |
| Kamera | Nein | Ja |
| Physisch | ||
| Ca.-Preis | $1,299 | $2,499 |
| Erscheinungsjahr | 2023 | 2024 |
| Gewicht | 14.6 kg | 20 kg |
Vor- und Nachteile
Snapmaker Ray 20W
Was uns gefällt
- Smart Air Assist pump included in box
- Large 400×600mm work area
- Wi-Fi + USB connectivity
- LightBurn compatible out of the box
- Strong Snapmaker community and ecosystem
Achtung
- No autofocus (manual focus lever)
- No built-in enclosure (sold separately)
- No camera for material detection
- Lower power than 40W model
xTool S1 40W
Was uns gefällt
- Cuts 18mm wood and 15mm acrylic in one pass
- Can mark and score thin stainless steel
- Full Class 1 enclosure — no safety glasses required
- Built-in camera for precise placement
- Autofocus and air assist included
- Same fast 36,000 mm/min (600 mm/s) speed as 20W
Achtung
- Significantly pricier than the 20W variant
- Heavier than open-frame equivalents
- Enclosure limits maximum material height
- Diode still falls short of CO₂ for thick acrylic or glass
Kompatible Materialien
Snapmaker Ray 20W
HolzAcrylLederStoffPapierEloxiertes Aluminium
xTool S1 40W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravurEloxiertes Aluminiumstainless steel
Snapmaker Ray 20W kostet $1,299 (48% weniger) als xTool S1 40W, das $2,499 kostet.
xTool S1 40W hat 50% mehr optische Leistung (40W vs. 20W).
Snapmaker Ray 20W bietet einen 34% größeren Arbeitsbereich (400 × 600 mm vs. 498 × 319 mm).
xTool S1 40W hat eine 17% höhere Höchstgeschwindigkeit (36,000 mm/min vs. 30,000 mm/min).
Bei den Funktionen gilt: xTool S1 40W verfügt über ein geschlossenes Gehäuse, Snapmaker Ray 20W nicht; xTool S1 40W verfügt über eine Kamera, Snapmaker Ray 20W nicht.