Sculpfun S9 vs. Two Trees TTS-55
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 450 nm | 450 nm |
| Optische Leistung | 5.5 W | 5.5 W |
| Leistung | ||
| Arbeitsbereich | 410 × 415 mm | 300 × 300 mm |
| Höchstgeschwindigkeit | 6,000 mm/min | 10,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Ja | Nein |
| WLAN | Nein | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $189 | $139 |
| Erscheinungsjahr | 2022 | 2021 |
| Gewicht | 3 kg | 2.8 kg |
Vor- und Nachteile
Sculpfun S9
Was uns gefällt
- Excellent value at under $200
- Ultra-thin 0.06mm compressed spot
- Easy 20-minute assembly
- Compatible with LightBurn, LaserGRBL
- Cuts 8mm pine cleanly
Achtung
- No air assist or enclosure
- No WiFi connectivity
- Open frame requires safe operating environment
Two Trees TTS-55
Was uns gefällt
- Very low price point
- Compact and easy to store
- Simple GRBL-based operation
- Good starting point for beginners
- Light at 2.8 kg
Achtung
- Small 300×300mm work area
- No WiFi, air assist, or enclosure
- No rotary support
- Slower than modern competitors
Kompatible Materialien
Sculpfun S9
HolzLederPappeStoffPapierGummiAcryl
Two Trees TTS-55
HolzLederPappeStoffPapierGummi
Two Trees TTS-55 kostet $139 (26% weniger) als Sculpfun S9, das $189 kostet.
Beide Maschinen haben die gleiche optische Leistung von 5.5W.
Sculpfun S9 bietet einen 47% größeren Arbeitsbereich (410 × 415 mm vs. 300 × 300 mm).
Two Trees TTS-55 hat eine 40% höhere Höchstgeschwindigkeit (10,000 mm/min vs. 6,000 mm/min).
Bei den Funktionen gilt: Sculpfun S9 verfügt über Kompatibilität mit einem Rotationsaufsatz, Two Trees TTS-55 nicht.