Sculpfun S30 Pro Max 20W vs. xTool D1 Pro 20W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 455 nm |
| Optische Leistung | 20 W | 20 W |
| Leistung | ||
| Arbeitsbereich | 370 × 360 mm | 430 × 390 mm |
| Höchstgeschwindigkeit | 18,000 mm/min | 24,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Ja | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Nein | Ja |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $499 | $699 |
| Erscheinungsjahr | 2023 | 2022 |
| Gewicht | 7.5 kg | 5.8 kg |
Vor- und Nachteile
Sculpfun S30 Pro Max 20W
Was uns gefällt
- Cuts up to 15mm pine in one pass
- Air assist included standard
- Expandable frame design
- Good value for 20W output
Achtung
- Open frame — no enclosure safety
- No WiFi connectivity
- Requires proper ventilation for cutting
- Heavier than smaller open-frame models
xTool D1 Pro 20W
Was uns gefällt
- Cuts up to 10mm pine in a single pass
- Air assist included in the box
- WiFi and USB control
- Excellent engraving speed at 24,000 mm/min
- Wide material compatibility
Achtung
- No enclosure — not safe for unattended operation
- Higher price point for a diode laser
- Requires ventilation setup for cutting fumes
Kompatible Materialien
Sculpfun S30 Pro Max 20W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravur
xTool D1 Pro 20W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravur
Sculpfun S30 Pro Max 20W kostet $499 (29% weniger) als xTool D1 Pro 20W, das $699 kostet.
Beide Maschinen haben die gleiche optische Leistung von 20W.
xTool D1 Pro 20W bietet einen 21% größeren Arbeitsbereich (430 × 390 mm vs. 370 × 360 mm).
xTool D1 Pro 20W hat eine 25% höhere Höchstgeschwindigkeit (24,000 mm/min vs. 18,000 mm/min).
Bei den Funktionen gilt: xTool D1 Pro 20W verfügt über WLAN-Konnektivität, Sculpfun S30 Pro Max 20W nicht.