Sculpfun S30 Pro Max 20W vs. xTool D1 Pro 10W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 455 nm |
| Optische Leistung | 20 W | 10 W |
| Leistung | ||
| Arbeitsbereich | 370 × 360 mm | 430 × 400 mm |
| Höchstgeschwindigkeit | 18,000 mm/min | 24,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Ja | Nein |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Nein | Ja |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $499 | $349 |
| Erscheinungsjahr | 2023 | 2022 |
| Gewicht | 7.5 kg | 5.2 kg |
Vor- und Nachteile
Sculpfun S30 Pro Max 20W
Was uns gefällt
- Cuts up to 15mm pine in one pass
- Air assist included standard
- Expandable frame design
- Good value for 20W output
Achtung
- Open frame — no enclosure safety
- No WiFi connectivity
- Requires proper ventilation for cutting
- Heavier than smaller open-frame models
xTool D1 Pro 10W
Was uns gefällt
- Dual-beam compression for ultra-fine detail
- Fast 24,000 mm/min maximum speed
- WiFi and USB connectivity
- Compatible with rotary attachment for cylindrical objects
- Can engrave on stone and glass with reduced power
Achtung
- Open frame means no enclosure safety
- Air assist sold separately
- 10W insufficient for cutting thick materials
Kompatible Materialien
Sculpfun S30 Pro Max 20W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravur
xTool D1 Pro 10W
HolzLederAcrylPappeStoffPapierGummiStein
xTool D1 Pro 10W kostet $349 (30% weniger) als Sculpfun S30 Pro Max 20W, das $499 kostet.
Sculpfun S30 Pro Max 20W hat 50% mehr optische Leistung (20W vs. 10W).
xTool D1 Pro 10W bietet einen 23% größeren Arbeitsbereich (430 × 400 mm vs. 370 × 360 mm).
xTool D1 Pro 10W hat eine 25% höhere Höchstgeschwindigkeit (24,000 mm/min vs. 18,000 mm/min).
Bei den Funktionen gilt: Sculpfun S30 Pro Max 20W verfügt über Luftunterstützung, xTool D1 Pro 10W nicht; xTool D1 Pro 10W verfügt über WLAN-Konnektivität, Sculpfun S30 Pro Max 20W nicht.