LaserPecker LP2 Plus vs. Snapmaker Ray 20W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 450 nm | 455 nm |
| Optische Leistung | 10 W | 20 W |
| Leistung | ||
| Arbeitsbereich | 100 × 100 mm | 400 × 600 mm |
| Höchstgeschwindigkeit | 240,000 mm/min | 30,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Nein | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Ja |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $799 | $1,299 |
| Erscheinungsjahr | 2026 | 2023 |
| Gewicht | 3.39 kg | 14.6 kg |
Vor- und Nachteile
LaserPecker LP2 Plus
Was uns gefällt
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Achtung
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Snapmaker Ray 20W
Was uns gefällt
- Smart Air Assist pump included in box
- Large 400×600mm work area
- Wi-Fi + USB connectivity
- LightBurn compatible out of the box
- Strong Snapmaker community and ecosystem
Achtung
- No autofocus (manual focus lever)
- No built-in enclosure (sold separately)
- No camera for material detection
- Lower power than 40W model
Kompatible Materialien
LaserPecker LP2 Plus
HolzLederAcrylPapierSteinEloxiertes Aluminiumstainless steelGlasGummi
Snapmaker Ray 20W
HolzAcrylLederStoffPapierEloxiertes Aluminium
LaserPecker LP2 Plus kostet $799 (38% weniger) als Snapmaker Ray 20W, das $1,299 kostet.
Snapmaker Ray 20W hat 50% mehr optische Leistung (20W vs. 10W).
Snapmaker Ray 20W bietet einen 96% größeren Arbeitsbereich (400 × 600 mm vs. 100 × 100 mm).
LaserPecker LP2 Plus hat eine 88% höhere Höchstgeschwindigkeit (240,000 mm/min vs. 30,000 mm/min).
Bei den Funktionen gilt: Snapmaker Ray 20W verfügt über Luftunterstützung, LaserPecker LP2 Plus nicht.