LaserPecker LP2 Plus vs. Sculpfun S30 Pro Max 20W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 450 nm | 455 nm |
| Optische Leistung | 10 W | 20 W |
| Leistung | ||
| Arbeitsbereich | 100 × 100 mm | 370 × 360 mm |
| Höchstgeschwindigkeit | 240,000 mm/min | 18,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Nein | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $799 | $499 |
| Erscheinungsjahr | 2026 | 2023 |
| Gewicht | 3.39 kg | 7.5 kg |
Vor- und Nachteile
LaserPecker LP2 Plus
Was uns gefällt
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Achtung
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Sculpfun S30 Pro Max 20W
Was uns gefällt
- Cuts up to 15mm pine in one pass
- Air assist included standard
- Expandable frame design
- Good value for 20W output
Achtung
- Open frame — no enclosure safety
- No WiFi connectivity
- Requires proper ventilation for cutting
- Heavier than smaller open-frame models
Kompatible Materialien
LaserPecker LP2 Plus
HolzLederAcrylPapierSteinEloxiertes Aluminiumstainless steelGlasGummi
Sculpfun S30 Pro Max 20W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravur
Sculpfun S30 Pro Max 20W kostet $499 (38% weniger) als LaserPecker LP2 Plus, das $799 kostet.
Sculpfun S30 Pro Max 20W hat 50% mehr optische Leistung (20W vs. 10W).
Sculpfun S30 Pro Max 20W bietet einen 92% größeren Arbeitsbereich (370 × 360 mm vs. 100 × 100 mm).
LaserPecker LP2 Plus hat eine 93% höhere Höchstgeschwindigkeit (240,000 mm/min vs. 18,000 mm/min).
Bei den Funktionen gilt: Sculpfun S30 Pro Max 20W verfügt über Luftunterstützung, LaserPecker LP2 Plus nicht; LaserPecker LP2 Plus verfügt über WLAN-Konnektivität, Sculpfun S30 Pro Max 20W nicht.