LaserPecker LP1 Plus vs. Sculpfun S30 Pro 10W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 405 nm | 455 nm |
| Optische Leistung | 0.6 W | 10 W |
| Leistung | ||
| Arbeitsbereich | 100 × 100 mm | 380 × 385 mm |
| Höchstgeschwindigkeit | 36,000 mm/min | 6,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Nein | Ja |
| Rotationsaufsatz-kompatibel | Nein | Ja |
| WLAN | Nein | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $219 | $329 |
| Erscheinungsjahr | 2026 | 2023 |
| Gewicht | 0.72 kg | 6.8 kg |
Vor- und Nachteile
LaserPecker LP1 Plus
Was uns gefällt
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Achtung
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Sculpfun S30 Pro 10W
Was uns gefällt
- Built-in air assist pump
- Expandable to 920×380mm with Y-extension kit
- Good price-to-area ratio
- Strong community and software support
Achtung
- Large footprint may not suit small workshops
- No WiFi — USB only
- Frame rigidity decreases at max extension
Kompatible Materialien
LaserPecker LP1 Plus
HolzLederPapierplasticAcrylStofffood
Sculpfun S30 Pro 10W
HolzAcrylLederPappeStoffPapierGummiStein
LaserPecker LP1 Plus kostet $219 (33% weniger) als Sculpfun S30 Pro 10W, das $329 kostet.
Sculpfun S30 Pro 10W hat 94% mehr optische Leistung (10W vs. 0.6W).
Sculpfun S30 Pro 10W bietet einen 93% größeren Arbeitsbereich (380 × 385 mm vs. 100 × 100 mm).
LaserPecker LP1 Plus hat eine 83% höhere Höchstgeschwindigkeit (36,000 mm/min vs. 6,000 mm/min).
Bei den Funktionen gilt: Sculpfun S30 Pro 10W verfügt über Luftunterstützung, LaserPecker LP1 Plus nicht; Sculpfun S30 Pro 10W verfügt über Kompatibilität mit einem Rotationsaufsatz, LaserPecker LP1 Plus nicht.