LaserPecker LP1 Plus vs. Sculpfun iCube Ultra 12W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 405 nm | 455 nm |
| Optische Leistung | 0.6 W | 12 W |
| Leistung | ||
| Arbeitsbereich | 100 × 100 mm | 150 × 150 mm |
| Höchstgeschwindigkeit | 36,000 mm/min | 10,000 mm/min |
| Fokus | Manuell | Autofokus |
| Funktionen | ||
| Gehäuse | Nein | Ja |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Nein | Ja |
| WLAN | Nein | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $219 | $329 |
| Erscheinungsjahr | 2026 | 2025 |
| Gewicht | 0.72 kg | 5.95 kg |
Vor- und Nachteile
LaserPecker LP1 Plus
Was uns gefällt
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Achtung
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Sculpfun iCube Ultra 12W
Was uns gefällt
- Class 1 safety certification — fully enclosed, door-interlock protected
- 12W diode cuts 10mm paulownia in one pass
- Built-in multi-layer smoke filtration system
- Compact and portable at 5.95 kg — smallest 12W enclosed laser
- Auto-focus for hands-off setup
- Optional dual-laser version adds 1.2W IR for marking metals
Achtung
- Small 150×150mm work area
- Bluetooth/USB only — no WiFi
- Air assist sold as separate accessory
- Camera available as separate accessory only
Kompatible Materialien
LaserPecker LP1 Plus
HolzLederPapierplasticAcrylStofffood
Sculpfun iCube Ultra 12W
HolzLederAcrylPappeStoffPapierGummiSteinMetallgravur
LaserPecker LP1 Plus kostet $219 (33% weniger) als Sculpfun iCube Ultra 12W, das $329 kostet.
Sculpfun iCube Ultra 12W hat 95% mehr optische Leistung (12W vs. 0.6W).
Sculpfun iCube Ultra 12W bietet einen 56% größeren Arbeitsbereich (150 × 150 mm vs. 100 × 100 mm).
LaserPecker LP1 Plus hat eine 72% höhere Höchstgeschwindigkeit (36,000 mm/min vs. 10,000 mm/min).
Bei den Funktionen gilt: Sculpfun iCube Ultra 12W verfügt über ein geschlossenes Gehäuse, LaserPecker LP1 Plus nicht; Sculpfun iCube Ultra 12W verfügt über Kompatibilität mit einem Rotationsaufsatz, LaserPecker LP1 Plus nicht.