Glowforge Spark vs. LaserPecker LP2 Plus
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 450 nm |
| Optische Leistung | 6 W | 10 W |
| Leistung | ||
| Arbeitsbereich | 203 × 305 mm | 100 × 100 mm |
| Höchstgeschwindigkeit | 8,000 mm/min | 240,000 mm/min |
| Fokus | Autofokus | Manuell |
| Funktionen | ||
| Gehäuse | Ja | Nein |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Nein | Ja |
| WLAN | Ja | Ja |
| Kamera | Ja | Nein |
| Physisch | ||
| Ca.-Preis | $899 | $799 |
| Erscheinungsjahr | 2024 | 2026 |
| Gewicht | 4.9 kg | 3.39 kg |
Vor- und Nachteile
Glowforge Spark
Was uns gefällt
- Easiest laser to get started with — ~30-minute setup
- Free Glowforge Print software works on any device (Mac, PC, tablet, phone)
- Built-in camera with live preview for material placement
- Class 1 enclosed — safe for home and classroom use
- Wide material library with auto-detected settings
Achtung
- Cloud-dependent — requires internet for every job
- Small 203×305mm cutting area for the price
- Only 6W — limited cut depth and no thick stock
- Subscription costs for premium design catalogue
- Not compatible with LightBurn
LaserPecker LP2 Plus
Was uns gefällt
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Achtung
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Kompatible Materialien
Glowforge Spark
HolzLederAcrylPappeStoffPapierGummi
LaserPecker LP2 Plus
HolzLederAcrylPapierSteinEloxiertes Aluminiumstainless steelGlasGummi
LaserPecker LP2 Plus kostet $799 (11% weniger) als Glowforge Spark, das $899 kostet.
LaserPecker LP2 Plus hat 40% mehr optische Leistung (10W vs. 6W).
Glowforge Spark bietet einen 84% größeren Arbeitsbereich (203 × 305 mm vs. 100 × 100 mm).
LaserPecker LP2 Plus hat eine 97% höhere Höchstgeschwindigkeit (240,000 mm/min vs. 8,000 mm/min).
Bei den Funktionen gilt: Glowforge Spark verfügt über ein geschlossenes Gehäuse, LaserPecker LP2 Plus nicht; Glowforge Spark verfügt über eine Kamera, LaserPecker LP2 Plus nicht; LaserPecker LP2 Plus verfügt über Kompatibilität mit einem Rotationsaufsatz, Glowforge Spark nicht.