FLUX Lazervida 10W vs. Sculpfun S30 Pro 10W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 450 nm | 455 nm |
| Optische Leistung | 10 W | 10 W |
| Leistung | ||
| Arbeitsbereich | 406 × 406 mm | 380 × 385 mm |
| Höchstgeschwindigkeit | 18,000 mm/min | 6,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Nein | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Nein | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $619 | $329 |
| Erscheinungsjahr | 2022 | 2023 |
| Gewicht | 4 kg | 6.8 kg |
Vor- und Nachteile
FLUX Lazervida 10W
Was uns gefällt
- Very lightweight at just 4 kg — easy to move and store
- Large 406×406mm work area for the price
- Ultra-fine 0.08×0.08mm spot for detailed engraving
- Compatible with LightBurn and LaserGRBL in addition to Swiftray
- Optional enclosure, rotary, and air assist add-ons available
Achtung
- Open frame / Class 4 — requires safety goggles during operation
- USB only — no WiFi connectivity
- No built-in camera
- Manual focus only
- Primarily Japan-market; limited global distribution
Sculpfun S30 Pro 10W
Was uns gefällt
- Built-in air assist pump
- Expandable to 920×380mm with Y-extension kit
- Good price-to-area ratio
- Strong community and software support
Achtung
- Large footprint may not suit small workshops
- No WiFi — USB only
- Frame rigidity decreases at max extension
Kompatible Materialien
FLUX Lazervida 10W
HolzLederAcrylPappeStoffPapierGummiSteinEloxiertes Aluminium
Sculpfun S30 Pro 10W
HolzAcrylLederPappeStoffPapierGummiStein
Sculpfun S30 Pro 10W kostet $329 (47% weniger) als FLUX Lazervida 10W, das $619 kostet.
Beide Maschinen haben die gleiche optische Leistung von 10W.
FLUX Lazervida 10W bietet einen 11% größeren Arbeitsbereich (406 × 406 mm vs. 380 × 385 mm).
FLUX Lazervida 10W hat eine 67% höhere Höchstgeschwindigkeit (18,000 mm/min vs. 6,000 mm/min).
Bei den Funktionen gilt: Sculpfun S30 Pro 10W verfügt über Luftunterstützung, FLUX Lazervida 10W nicht.