FLUX Ador vs. xTool S1 40W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 450 nm | 455 nm |
| Optische Leistung | 10 W | 40 W |
| Leistung | ||
| Arbeitsbereich | 430 × 300 mm | 498 × 319 mm |
| Höchstgeschwindigkeit | 24,000 mm/min | 36,000 mm/min |
| Fokus | Autofokus | Autofokus |
| Funktionen | ||
| Gehäuse | Ja | Ja |
| Luftunterstützung | Nein | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Ja |
| Kamera | Ja | Ja |
| Physisch | ||
| Ca.-Preis | $1,399 | $2,499 |
| Erscheinungsjahr | 2023 | 2024 |
| Gewicht | 9 kg | 20 kg |
Vor- und Nachteile
FLUX Ador
Was uns gefällt
- Quick-swap module system — laser, IR, and printing modules interchangeable
- Optional 20W module upgrade and 2W IR for bare metal marking
- Built-in 8MP camera for precise material placement
- Fully enclosed Class 1 design
- Optional CMYK color printing add-on — unique at this price
Achtung
- 10W base module; 20W upgrade costs an additional $699
- No built-in air assist
- Diode cannot engrave glass or cut thick acrylic as cleanly as CO2
- CMYK printing and 2W IR module sold separately
- LightBurn requires optional USB bridge cable
xTool S1 40W
Was uns gefällt
- Cuts 18mm wood and 15mm acrylic in one pass
- Can mark and score thin stainless steel
- Full Class 1 enclosure — no safety glasses required
- Built-in camera for precise placement
- Autofocus and air assist included
- Same fast 36,000 mm/min (600 mm/s) speed as 20W
Achtung
- Significantly pricier than the 20W variant
- Heavier than open-frame equivalents
- Enclosure limits maximum material height
- Diode still falls short of CO₂ for thick acrylic or glass
Kompatible Materialien
FLUX Ador
HolzLederAcrylPappeStoffPapierGummiMetallgravurEloxiertes Aluminium
xTool S1 40W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravurEloxiertes Aluminiumstainless steel
FLUX Ador kostet $1,399 (44% weniger) als xTool S1 40W, das $2,499 kostet.
xTool S1 40W hat 75% mehr optische Leistung (40W vs. 10W).
xTool S1 40W bietet einen 19% größeren Arbeitsbereich (498 × 319 mm vs. 430 × 300 mm).
xTool S1 40W hat eine 33% höhere Höchstgeschwindigkeit (36,000 mm/min vs. 24,000 mm/min).
Bei den Funktionen gilt: xTool S1 40W verfügt über Luftunterstützung, FLUX Ador nicht.