FLUX Ador vs. LaserPecker LP2 Plus
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 450 nm | 450 nm |
| Optische Leistung | 10 W | 10 W |
| Leistung | ||
| Arbeitsbereich | 430 × 300 mm | 100 × 100 mm |
| Höchstgeschwindigkeit | 24,000 mm/min | 240,000 mm/min |
| Fokus | Autofokus | Manuell |
| Funktionen | ||
| Gehäuse | Ja | Nein |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Ja |
| Kamera | Ja | Nein |
| Physisch | ||
| Ca.-Preis | $1,399 | $799 |
| Erscheinungsjahr | 2023 | 2026 |
| Gewicht | 9 kg | 3.39 kg |
Vor- und Nachteile
FLUX Ador
Was uns gefällt
- Quick-swap module system — laser, IR, and printing modules interchangeable
- Optional 20W module upgrade and 2W IR for bare metal marking
- Built-in 8MP camera for precise material placement
- Fully enclosed Class 1 design
- Optional CMYK color printing add-on — unique at this price
Achtung
- 10W base module; 20W upgrade costs an additional $699
- No built-in air assist
- Diode cannot engrave glass or cut thick acrylic as cleanly as CO2
- CMYK printing and 2W IR module sold separately
- LightBurn requires optional USB bridge cable
LaserPecker LP2 Plus
Was uns gefällt
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Achtung
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Kompatible Materialien
FLUX Ador
HolzLederAcrylPappeStoffPapierGummiMetallgravurEloxiertes Aluminium
LaserPecker LP2 Plus
HolzLederAcrylPapierSteinEloxiertes Aluminiumstainless steelGlasGummi
LaserPecker LP2 Plus kostet $799 (43% weniger) als FLUX Ador, das $1,399 kostet.
Beide Maschinen haben die gleiche optische Leistung von 10W.
FLUX Ador bietet einen 92% größeren Arbeitsbereich (430 × 300 mm vs. 100 × 100 mm).
LaserPecker LP2 Plus hat eine 90% höhere Höchstgeschwindigkeit (240,000 mm/min vs. 24,000 mm/min).
Bei den Funktionen gilt: FLUX Ador verfügt über ein geschlossenes Gehäuse, LaserPecker LP2 Plus nicht; FLUX Ador verfügt über eine Kamera, LaserPecker LP2 Plus nicht.