FLUX Ador vs. Glowforge Aura
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 450 nm | 450 nm |
| Optische Leistung | 10 W | 6 W |
| Leistung | ||
| Arbeitsbereich | 430 × 300 mm | 305 × 305 mm |
| Höchstgeschwindigkeit | 24,000 mm/min | 15,000 mm/min |
| Fokus | Autofokus | Autofokus |
| Funktionen | ||
| Gehäuse | Ja | Ja |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Ja | Nein |
| WLAN | Ja | Ja |
| Kamera | Ja | Ja |
| Physisch | ||
| Ca.-Preis | $1,399 | $1,199 |
| Erscheinungsjahr | 2023 | 2023 |
| Gewicht | 9 kg | 8.6 kg |
Vor- und Nachteile
FLUX Ador
Was uns gefällt
- Quick-swap module system — laser, IR, and printing modules interchangeable
- Optional 20W module upgrade and 2W IR for bare metal marking
- Built-in 8MP camera for precise material placement
- Fully enclosed Class 1 design
- Optional CMYK color printing add-on — unique at this price
Achtung
- 10W base module; 20W upgrade costs an additional $699
- No built-in air assist
- Diode cannot engrave glass or cut thick acrylic as cleanly as CO2
- CMYK printing and 2W IR module sold separately
- LightBurn requires optional USB bridge cable
Glowforge Aura
Was uns gefällt
- Easiest setup and operation of any laser — no technical knowledge needed
- Cloud app with automatic material settings
- Built-in camera for precise placement
- Fully enclosed and safe
- Large design library available
Achtung
- Cloud-dependent — requires internet for every job
- Slower than modern competitors
- Only 6W — limited cutting ability
- Ongoing subscription costs for premium designs
- Not compatible with LightBurn
Kompatible Materialien
FLUX Ador
HolzLederAcrylPappeStoffPapierGummiMetallgravurEloxiertes Aluminium
Glowforge Aura
HolzLederAcrylPappeStoffPapierGummi
Glowforge Aura kostet $1,199 (14% weniger) als FLUX Ador, das $1,399 kostet.
FLUX Ador hat 40% mehr optische Leistung (10W vs. 6W).
FLUX Ador bietet einen 28% größeren Arbeitsbereich (430 × 300 mm vs. 305 × 305 mm).
FLUX Ador hat eine 38% höhere Höchstgeschwindigkeit (24,000 mm/min vs. 15,000 mm/min).
Bei den Funktionen gilt: FLUX Ador verfügt über Kompatibilität mit einem Rotationsaufsatz, Glowforge Aura nicht.